show me tell me questions Flashcards
completed deck to aid revising for show me tell me questions
Tell me how you would check that the engine has a sufficient amount of oil?
Open the bonnet, remove the dipstick, wipe it clean, re-insert it, and then pull it back out again. Check that the oil level is between the minimum and maximum marks.
Tell me about how you would check the brakes are working before you start your journey
They should not feel spongy or slack. Brakes should be tested as you set off. And when you set off, test them again and the vehicle shouldn’t pull to one side
What is the correct way to check the brake fluid level? / Tell me how you’d check that you have a safe level of hydraulic brake fluid.
Open bonnet, Locate brake fluid reservoir and check the level against the high and low markings on the side.
Which control should you show to operate the headlights?
The headlight switch.
Tell me where you would find the information for the recommended tyre pressures.
And, how would you check them?
Check the manufacturer’s guide or inside fuel filler cap.
Use a reliable pressure gauge, check and adjust pressures when tyres are cold. And don’t forget the spare tyre. Remember to refit valve caps after.
What should you do to demonstrate the use of hazard lights?
Turn on the hazard warning lights using the control switch.
What should you do if asked how to check the operation of the horn?
Press the horn button to demonstrate its function.
What is the correct procedure for checking that the engine has a sufficient engine coolant level?
Open bonnet, Locate coolant level markings on the header tank or radiator fill gap. Ensure the level is between the high and low marks and top up if necessary.
Never open your engine coolant until the car is cold as its hot liquid under high pressure.
Tell me how you would switch on the rear fog lights and when you would use them.
Turn on the dipped headlights and then press the fog light button. Check the warning light on the dashboard.
Use fog lights in poor visibility conditions (can’t see more than 100m ahead).
what is the symbol for dipped headlights
green jellyfish
what is the symbol for fog lights
amber jellyfish with a crossed out tail
What is the purpose of the warning lights on the dashboard?
To alert the driver of potential issues with the vehicle.
Tell me how you can check the direction indicators are working?
Turn the indicators on and ignition if needed, then check the outside of the vehicle to see if they are working.
How do you would switch the headlights from dipped to main beam?
And how do you know that main beam is switched on?
Switch to dipped headlights and then for main beam, push stick away from you.
Check that the main beam warning light on the dashboard is illuminated.
What is the dashboard warning light for main beam?
blue jellyfish
Tell me how to check your head restraint is correctly adjusted so it provides the best protection in the event of a crash.
Adjust it so the rigid part is at least as high as your eyes or the top of your ears, and close to the back of your head as is comfortable.
Note: some head restraints may not be adjustable
Talk to me about how you check your tyres have sufficient tread depth and their general condition is safe for the road.
No cuts or bulges. Tread depth is at least 1.6mm across the central 3/4 of the breadth of the tyre, and around the entire outer circumference of the tyre.
Tell me how you would check that the headlights and tail lights are working.
Turn on the dipped headlights and check that they are working by walking around the vehicle. Do this only when it’s safe to do so.
Tell me how you would know if there is a fault/problem with the anti-lock braking system (ABS)
An amber warning light will turn on on the dashboard if there is a problem with the ABS
Tell me how you would check that the brake lights are functioning.
Press the brake pedal and use reflections in windows or ask someone to check that they are working.
How do you check the power-assisted steering is activated / working before starting journey?
If steering becomes heavy, system may not be working properly.
Before driving, make 2 simple checks:
- check by gently pressing the steering wheel while starting the engine. Should result in a slight but noticeable movement as the system begins to operate
- Alternatively, turning the wheel just after moving off will give immediate indication that power assisted steering is functioning.
The steering should feel lighter –> power assistance is functioning.
Show me how you wash and clean the rear windscreen?
” “
Show me how you wash and clean the front windscreen?
” “
Show me how you switch on your dipped headlights?
” “
Show me how you set the rear demister?
” “
Show me how you operate the horn?
” “
Show me how you demist the front windscreen?
” “
Show me how you’d open and close the side window?
” “
