Show Me Tell Me Questions Flashcards

You may prefer our related Brainscape-certified flashcards:
1
Q

How to open the bonnet

A

Release lever in the footwell on drivers side, then release lever underneath the bonnet

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Open the bonnet and tell me how you’d check that the engine has sufficient oil

A

Point at the dipstick and say that I would pull out the dipstick, wipe all the oil off of it with a cloth and then put it back in and pull it out again.
It should leave an oily mark between the minimum and maximum markers

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Open the bonnet and tell me how you’d check that the engine has sufficient engine coolant

A

Check the engine coolant and look on the side of it. The liquid should be between the minimum and maximum markings. If I had to top it up I would only do so when it was cold

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Open the bonnet and tell me how you’d check that you have a safe level of hydraulic brake fluid

A

The brake fluid container will have a lid with a little circle on it between a set of brackets. Down its side the liquid should be between the maximum and minimum markings

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Tell me how you’d check the brakes are working before starting a journey

A

Drive forwards slowly and press the foot brake. It shouldn’t feel spongy or slack, and the car shouldn’t pull to one side

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Tell me where you’d find the j formation for the recommended tyre pressures for this car and how the tyre pressure should be checked

A

I would check all the tyres including the spare tyre when they’re cold, using an air pressure gage. Information will either be in the drivers manual or on a door pillar

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Tell me how you’d ensure your head restraint is correctly adjusted

A

The head rest should be adjusted so the rigid part is at least as high as my eye and as close to the back of my head as comfortable

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Tell me how’s your check the tyres so they have sufficient tread depth

A

Check all tyres using a tread depth gage. The depth should be no less than 1.6mm across the centre of the tyre. There also shouldn’t be an y cuts or bulges on the tyre.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Tell me how you’d check that the headlights and tail lights are working

A

I would turn the dipped headlights are on in my car, then I would walk around the car to ensure the lights are on

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Tell me how you’d know if try ere was a problem with your Anti Lock Braking System ABS

A

An ABS light would appear on the dash

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Tell me how you’d check the indicators are working

A

I would press the hazard warning lights button and the. Walk around the car to make sure all 6 indicators work

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Tell me how you’d check the brake lights are working

A

I would press the foot brake and either look for reflections in windows, or ask for someone to help to check if they worked.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Tell me how you’d check the power assisted steering is working before starting a journey

A

As soon as I move off I should feel that the steering is light to turn and not heavy

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Tell me how you’d switch on the rear fog light and when I would use it

A

To turn them on I would turn on the dipped headlights, then press the rear fog light button which faces to the left. I would know it’s on by seeing a warning light on the dash

I would use it when visibility is less than 100metres.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Tell me how you’d switch your headlight from dipped to main beam and how I’d know it’s on

A

I’d turn on the dipped headlights, then push my indicator stick away from me. A warning light will appear to show that the main beam is on

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Show me how you’d clean the rear windscreen

A

Look for the rectangular window cleaning symbol and hold it as long as necessary

17
Q

Show me how you’d wash the front windscreen

A

I would pull the right stick towards me to wash it

18
Q

Show me how you’d switch on you’re dipped headlights

A

Turn the headlight switch once to the left and a dashboard light will appear

19
Q

Show me how you’d set the rear demister

A

I would press the rear demister button (square) and turn the switch fan on

20
Q

Show me how you’d demist the front windscreen

A

Press the semi circular demist button and turn the fan on