Show Me Tell Me Flashcards
Show me how you would check the break lights are working on this car
Opportunities the break Perez, make use of reflections in Windows or garage doors. Ask someone to help, do not start engine
Show me or explain how you check that the power assisted steering is working before starting a journey
Gentle pressure on the steering wheel maintained while the engine is started should result in a slight noticeable movement as the system begins to operate
Show me how you would check the parking break for excessive wear
Apply foot break firmly, apply parking break so when it is fully applied it secures itself
Show me how you would check the horn is working
Press horn
Show me how you would clean the windscreen using the washer and wipers
Do it
Show me how you would switch on the rear fog lights and explain when you would use them
Opposite switch for dipped headlights and check warning light is on
Show me how you switch on your headlight from dipped to main beam, and explain how you would know the main beam is on
Opposite switch and check for main beam warning light
Show me how you would set the delisted controls to clear all windows effectively
Set all relevant controls
Open the bonnet, identify where you would check the engine and tell me how you would check the engine has sufficient oil levels
Wipe dipstick, dip it in, oil level should be between min & max, if it need filled do it in small amounts
Identify where the break fluid reservoir is and check that you have a safe level
Identify reservoir and check level between high and low markings
Tell me how you would check the brakes are working before starting a journey
Breaks should not feel spongy or slack, they should be tested as you set off. Should not pull to one side
Identify where the windscreen washer reservoir is and tell me how you would check the windscreen washer level
Open bonnet, there is a small canister, check it is between min and max
Tell em where you would find the information for the recommended tyre pressures for this car and how the tyre pressure should be checked
Check the manufacturers guide, use a reliable pressure gauge
Tell em how you make sure your head restraint is correctly adjusted so that it provides the best protection in the event of a crash
Head restraint Shiism be adjusted so that the rigid part is just as high as the eyes or top of the ears
Tell me how you would check to ensure the tyres have sufficient tread depth so they are safe to use on the road
No cuts or bulges, 1.6 MM. tread depth across the central 3 quarters of the tyre
