Show me/Tell me Flashcards
Open the bonnet, Identify where you would check the engine oil level and tell me how you would
check that the engine has sufficient oil.
Identify dipstick / oil level indicator, describe check of oil level against the minimum/maximum
markers.
Show me / explain how you would check that the power assisted steering is working before starting
a jourey.
If the steering becomes heavy the system may not be working properly. Turning the steering wheel just after moving off will give an immediate
indication that the power assistance is functioning.
Open the bonnet, identify where you would check the engine coolant level and tell me how you
would check that the engine has the correct level.
Identify high/low level markings on header tank where fitted or radiator filler cap, and describe
how to top up to correct level.
Show me how you would check the parking brake (handbrake) for excessive wear, make sure you
keep safe control of the vehicle.
Apply footbrake firmly. Demonstrate by applying parking brake (handbrake) that when it is fully
applied it secures itself, and is not at the end of the working travel.
Identify where the windscreen washer reservoir is and tell me how you would check the
windscreen washer level.
Identify reservoir and explain how to check level.
Show me how you would check that the horn is working (off road only).
Check is carried out by using control (turn on ignition if necessary).
Open the bonnet, Identify where the brake fluid reservoir is and tell me how you would check that
you have a safe level of hydraulic brake fluid.
Identify reservoir, check level against high/low markings.
Show me how you would check that the direction indicators are working.
Applying the indicators or hazard warning switch and check functioning of all indicators. (May
need to switch ignition on, prompt not to start engine)
Show me how you would check that the brake lights are working on this car. (I can assist you, if you
need to switch the ignition on, please don’t start the engine)
Operate brake pedal, make use of reflections in windows, garage doors, etc, or ask someone to
help. (May need to switch ignition on, prompt not to start engine)
Tell me how you would check that the brakes are working before starting a joumey.
Brakes should not feel spongy or slack. Brakes should be rested as you set off. Vehicle should not
pull to one side.
Tell me how you would check that the headlights & tall lights are working. (No need to exit vehicle)
Explanation: Operate switch (tum on ignition if necessary), then walk round vehicle.
Tell me where you would find the information for the recommended tyre pressures for this car and
how tyre pressures should be checked.
Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are
cold, don’t forget spare tyre, remember to refit valve caps.
Tell me how you would check the tyres to ensure that they have sufficient tread depth and that
their general condition is safe to use on the road.
No cuts and bulges, 1.6mm of tread depth across the central ¾ of the breadth of the tyre and
around the entire outer circumference.
Show me how you would clean the windscreen using the windscreen washer and wipers.
Operate control to wash and wipe windscreen (turn ignition on if necessary).
Show me how you would set the demister controls to clear all the windows effectively, this should
include both front and rear screens.
Set all relevant controls including; fan, temperature, air direction / source and heated screen to
clear windscreen and windows.
