Shop Practices Flashcards
What Point Angle for a drill bit is recommended for drilling Hard material?
150 degrees
What Point Angle for drill bits is recommended for drilling Soft material?
90 degrees
What Point Angle is recommended for drill bits to drill General material?
118 degrees
What is the Point Angle of a Prick Punch?
30-60 degrees
What is the Point Angle of a Centre Punch?
90 degrees
What is the Included Angle of a Flat Cold Chisel?
70 degrees
What does a Kerf do for a hacksaw blade?
Prevents it from binding while cutting.
What is the rule of thumb for picking out a hacksaws blade/pitch?
2 teeth should always be in contact with the part.
Which way are the teeth of a hacksaw pointed?
Away from the handle
On which motion does the hacksaw cut?
Forward Motion
What is another word sometimes used for Cutting Speed?
Surface Speed
What is cutting speed expressed in units?
Meters/Minute or Feet/Minute
Which has a faster Cutting Speed Carbide cutters or HSS cutters? By how much?
Carbide Cutters by 2.5 times
What is the equation for rpm of a power tool using Cutting Speed in metric?
Rpm = (CS x 1000)/(pie x D)
What is the equation for power tool rpm using Cutting Speed in imperial?
Rpm = (CS x 12) / (pie x D)