Shop

Question 1

Common parts to all machines

Answer 1

Table, fence, guard, blade, depth adjusting wheel, on / off switch, depth scale

Question 2

Operate only after passing _________ and with the ______________________

Answer 2

Safety test, teachers permission

Question 3

Always wear ____________

Answer 3

Eye protection

Question 4

Remove __________ eliminate ___________ and confine _______

Answer 4

Jewelry, loose clothing, and long hair

Question 5

Margin of safety is _______ in.

Answer 5

Two inches

Question 6

Make sure all __________ are in place and working properly

Answer 6

Guards

Question 7

Make all adjustments with the ______________

Answer 7

Power off

Question 8

Always hold the material ________ and never ________

Answer 8

Tightly, force it

Question 9

Make sure the machine has ________ before leaving

Answer 9

Stopped

Question 10

Always focus on the ______

Answer 10

Job at hand

Question 11

When cutting, hold the Material with your left hand more than two inches from the cut line and securely against the fence. Grab the upper handle tightly and use a slow smooth motion to cut. Always pull the blade through wood slowly and return the blade to fully up position. Always place fingers to the left of the cut line.

Answer 11

Miter saw

Question 12

Check wood for loose knots or forging objects. Don’t force wood into the machine. Select proper cut depth before inserting wood. Never look into the throat area. Do not stand in front of the feed area.

Answer 12

Planer

Question 13

Make several line cuts 1/16 in to 1/8 in. Hold the material with your left hand more than two inches from the blade. Minimum length of wood is 12 in. Do not joint the end of the grain. stand wood on edge. Start wood on the right and slide to the left.

Answer 13

Jointer

Question 14

Never use the miter guard and fence together. Hold the material with your left hand more than two inches from the blade. Blade should rise above wood so the gullets are slightly above wood. Never reach over the blade. Don’t stand in the line of cut when cutting. Always stand to the left of the blade.

Answer 14

Table saw

Question 15

Push wood in the direction clearly marked on the table. Write to the left! Hold the wood securely with both hands. Never place fingers over the bit when cutting. Hold the material with your left hand more than two inches from bit.

Answer 15

Router table