Section 1 Flashcards
Which of the following activities is not included in the scope of API 510
A.Rerating a vessel.
B.Operating a vessel.
C.Replacing a vessel head.
D.Internally inspecting a vessel.
B. Operating a vessel.
Which of the following activities is not included in the scope of API 510?
A. Setting relief device intervals.
B. Performing vessel alterations
C.Performing vessel fabrication
D. Performing vessel maintenance
C. Performing vessel fabrication
Which of the following equipment types is not covered by a API 510?
A. Heat exchanger
B. Safety reliefValve
C. Distillation column
D. Process heater (Furnace)
D. Process heater(furnace)
API 510 can be used:
A. Only by refining industries
B. Only by chemical industries
C. Only by petro chemical industries
D. By petro-chemical facilities and any other industry
D. By petro-chemical Facilities and any other industry
API 510 takes affect;
A.During the design stage of the vessel construction
B. During the fabrication stage of the vessel construction
C. Once the fabrication Hydro or pre-pneumatic test is completed
D. Once the nameplate is attached
E. Once the vessel is placed in service
F. Once the vessel has an operational problem
E. Once the vessel is placed in service
API 510 covers of vessels constructed to which fabrication code(s)?
A.Only ASME B&PV Sect. VIII
B. Only ASME B&PV sect. VIII and the API/ASME Code for Unfired pressure
C. ASME B&PV Sect. VIII and other current codes
D. Any fabrication code
D. Any fabrication code
When does API 510 stop applying to vessels?
A. In-service but have proven they do not corrode
B. In-service and the corrosion rate is less than.005 ipy
C. Out of service but stored for a future service
D.Retired and abandoned
E. Retired, removed and scrapped
D. Retired and abandoned
During repairs and alterations most of the code requirements come from:
A. API 510
B. ASME Section VIII
C. ASME section VIII or the construction code
D. The construction code
C. ASME section VIII Or the construction code
During a vessel repair, if there is a conflict between the requirements of API 510 and the construction code which should be followed
A. API 510
B. The construction code
C. Either code based on the inspectors recommendation
D. The code with the most stringent requirements
A. API 510
During a vessel alteration, if there is a conflict between the requirements of API 510 and the construction code which should be followed
A. API 510
B. The construction code
C. Either code based on the inspectors recommendation
D.The code with the most stringent requirements
A. API 510
Companies that use API 510 must:
A. Employer and authorized inspection agency
B. Have access to an authorized inspection agency
C. Either employer or have access to an authorized inspection agency
D. Employ professional engineers
E. Pay all API 510 contract inspectors $62.50/hr
C. Either employer or have access to an authorized inspection agency
Which of the following individuals must be directly employed by the owner?
A. Authorize inspector
B. Examiner
C. Pressure vessel engineer
D. Repair organization
E. No one-all can be contracted personnel
E. No one- All can be contracted personnel
Which code is used for RBI assessments?
A. API 573
B. API 579
C. API 580
D. API 2201
C. API 580
An in-service vessel is being repaired or altered. If there is a conflict between the requirements of API 510 and the legal jurisdiction, which should be followed?
A. API 510
B. The legal jurisdiction
C. The one with the most stringent requirements
D. Either set of the requirements based on the engineer and AI approval
C. The one with the most stringent requirements
Which code is used for fitness for service evaluation’s
A. API 579
B. API 660
C.API 2201
D. ASME B&PV Section V
A. API 579
