Safety Quiz Flashcards
After you tighten the bit remove the ________ from the chuck.
Chuck Key
Small pieces of wood must always be secured tightly using a ________ when using the drill press.
Clamp
When making adjustments on the drill press the power should be turned _____.
Off
When removing wood chips from the drill press table use a ____.
Brush
The long end of the work piece should be kept to the ____ of the drill press
Left
When using the band saw the guides should be adjusted to within ___ of the work piece
1/8”
When cutting around a tight radius you should make ____ cuts to take the tension off the blades
Relief
When making adjustments to the band saw the power should be turned ___
Off
The band saw is used to make ____ cuts
Irregular
When cutting around a tight radius on the scroll saw make ___ cuts to take the tension away from the blade
Relief
When making adjustments on the scroll saw the power should be turned _____
Off
The scroll saw is used to make ____ cuts
Irregular
Always cut _____ the project lines
Outside
Adjust the ____ To place the hold down on the wood
Hold down
