SAFETY COMPLIANCE KETER/RCR 2014 Flashcards
Safety compliance management interviews KETER/RCR questions 2014
CAN YOU DEMONSTRATE AND EXPLAIN THE EIGHT KEYS TO LIFTING/LOWERING?
1 - GET CLOSE TO THE OBJECT - WORK WITHIN YOUR POWER ZONE
2 - POSITION YOUR FEET SHOULDER WIDTH APART ONE SLIGHTLY IN FRONT OF THE OTHER
3 - BEND AT THE KNEES - KEEP THE NATURAL CURVE OF THE BACK
4 - TEST THE OBJECT FOR WEIGHT AND SHIFTING CONTENTS
5 - GET A FIRM GRIP AND GRASP OPPOSITE CORNERS
6 - LIFT WITH A SMOOTH STEADY MOTION - DONT JERK
7 - MOVE YOUR FEET - STEP OR PIVOT; DONT TWIST
8 - USE THE EXISTING EQUIPMENT OR FACILITIES TO ASSIST IN THE LIFT OR LOWER
WHAT ARE THE FIVE KEYS TO PREVENTING SLIPS AND FALLS?
1 - WALK AT A BRISK PACE - DONT RUN
2 - ESTABLISH FIRM FOOTING - MAINTAIN YOUR BALANCE
3 - DONT WALK ON CONVEYOR ROLLERS, CHUTES, AND SLIDES
4 - LOOK BEFORE STEPPING
5 - MAKE ADJUSTMENTS BASED ON CHANGING CONDITIONS
EXPLAIN THE (FUNCTIONAL) DIFFERENCE BETWEEN LOCKOUT AND CONVEYOR SECURING.
CONVEYOR SECURING IS A UPS PROGRAM USED BY OPERATIONS PEOPLE BEFORE GETTING ON A CONVEYOR BELT TO BREAK A JAM, REPOSITION A DIVERTER, WALK BELTS AT THE END OF THE SORT OR ANY TIME YOU HAVE TO GET ONTO A BELT. LOCKOUT IS A PROGRAM THAT COMPLIES WITH OSHA REGULATIONS. IT IS USED BY PEOPLE SUCH AS PE MECHANICS FOR MAINTENANCE PURPOSES SUCH AS REPAIRING, CLEANING OR RETRIEVING A PACKAGE FROM A MOTOR HOUSING
ARE YOU YARD CONTROL CERTIFIED OR NON-CERTIFIED ? WHAT ARE THE EIGHT (8) YARD CONTROL SAFETY RULES?
1 - ONLY CERTIFIED YARD PERSONNEL ARE ALLOWED IN THE YARD OUTSIDE OF THE DESIGNATED PEDESTRIAN WALKWAYS AND BREAK AREAS
2 - ALL FACILITY EMPLOYEES, WHETHER CERTIFIED OR NON CERTIFIED, MUST USE THE PEDESTRIAN DOORS TO ENTER OR EXIT THE BUILDING
3 - went on a break all employees are required to remain in designated break areas
4 - persons authorized to drive vehicles in the yard must obey posted speed limit signs and wear safety belts at all times
5 - vehicles must be equipped with operable headlights hazard lights or reflective material that provides 360° visibility
6 - employees authorized to drive vehicles in the yard I required to take the ignition keys with them whenever they leave the vehicle
7 - all certified yard employees are required to wear a reflective vest anytime they are working in the yard
8 - A certified yard employee must utilize an orange cone when working in the yard
When performing your conveyor securing and conveyor guard inspection how often do you do that and what are you looking for?
Inspections must be performed twice daily during the pre-trip and post trip of the work area. You are ensuring that every conveyor securing device has all of its components and is working properly. You were checking that all guards are locked and closed. Defects are noted on the inspection form and DECR
In a tornado hurricane or earthquake where do you assemble your employees and how are they notified?
Answer must be specific to area that the employee is currently working. Employees are generally notified by word-of-mouth. Location is building specific.
Explain what you would do if a package is generating smoke fumes or is otherwise irritating?
Don’t touch, secure my area by keeping employees all way and notify a designated responder.
Explain what you would do if the package is leaking and it carries no label or other indications of its contents.
Treat the package as hazardous. Don’t touch, secure my area by keeping employees away and notify a designated responder.
In an emergency evacuation where do you assemble your employees and where is the emergency evacuation plan posted for your area?
Answer must be specific to the area supervisor is working.
How do you know if he has mat package has been audited?
Acceptance auditors initials, date and SLIC
What do you do if you find a hazmat package that has not been audited?
Stop the progress of the package until it has been approved by a trained acceptance auditor.
How do you know what the hazmat package is prohibited or not allowed in the UPS system?
Look at the prohibited poster in left rear of trailer/ or on supervisors desk.
What do you do if you find a nine at the leaking package bearing a prohibited diamond label?
Remove the package to a secure location and immediately contact hazmat
How often must you salt employees?
Ground loaders once/month and air loaders once/week
How long do you keep salt logs on file?
One month plus current working month.
What do you do when a non-leaking explosive 1.1 or 1.2 prohibited packages is discovered in the system?
Stop the operation, clear the area and notify the appropriate chain of command
True or false; you may upgrade a ground hazmat to an air service level to meet time in transit requirements?
False
What is and HM10? What is your responsibility if you receive notification of an HM10?
An HM10 is a hazmat discrepancy or package that should not have moved through our system. I would investigate what caused the HM10 and re train any employees involved including disciplinary action if necessary.
What do you do when an undeclared hazmat his Discovered?
Stop the progression of the package and call an RMP or responder to process the package. Insured the package is held pending an investigation, not allowing its disposal or release until authorized
What do you do if you discovered a damaged or leaking haz mat?
Don’t touch, secure my area by keeping employees away and notifying a designated responder
