Safety Flashcards
Which of the following is not a safe work habit regarding the use of stepladders?
Standing on or above the top step of a step ladder
The mission of the occupational safety and health administration is
To save lives, prevent injuries and protect the health of America’s workers
When using a boom lift near overhead electrical power lines, technicians must keep a minimum distance of how many feet from the power lines?
10ft
Which of the following information should be displayed on a lock out tag?
Name of person performing work. Location of work being performed. Contact information of person performing work. Expected date and time of completion of work.
NOT location of emergency phone
Accidents are defined as
An unfortunate event resulting especially from carelessness or ignorance
Its current passes through the heart how many amps are required to cause ventricular fibrillation (which can lead to death)?
0.1-0.2 amps
100-200 milliampers
A confined space is defined as a place that is large enough to enter and perform assigned work, has limited or restricted means for entry and exit and _____.
Is not designed for continuous human occupancy
A fire alarm technician must use a straight ladder to climb up on the roof of a building. If the building is 23’ tall, how far should the base of the latter be placed from the building?
5’ 9”
1 foot away for every 4ft of height of Wall
A fire alarm technician must use a straight ladder to climb on the roof of a building. If the building is 24’ tall and he places the base of the latter 6’ from the building, how far must the latter extend beyond the top edge of the wall upon which the latter is placed?
3ft
The base of a 24’ ladder must be located how many feet away from the wall?
6’. That’s 1/4 the length
How many stairways must be installed in buildings that have more than 3 stories in height?
2
Guard rails are required to guard the open sides of all work surfaces that are ____ or higher or workers must be protected by other means.
7 1/2 feet
When climbing a step ladder how many points of contact should be maintained?
3
Which of the following is used to calculate the total weight of the ladder? A.tools B.hard hat C.you D.all of the above
all of the above
Which step ladder type should be avoided near electrical power sources? A.aluminum B.fiberglass C.wood D.none of the above
A.aluminum