Safety Flashcards
Answer
——— operate any power tool without the teacher’s permission
turn on
always wear—–when working in the shop
glasses
is forbidden in the shop at all time
horseplay
what you have to remove before operating machines
rings, watches, jewellry
how does your hair should be
tied
what do if there is an injury
report to the teacher
what do do if there is a broken equipment
report to the teacher
how u have to keep the shop?
neat and tidy
never leave a machine until it is—- and—-
switched off and has stopped moving
how much time do we need to clean
last 10 minutes
what you should not to do if there is one person at the machine
do not talk to them, don’t distract them
where has to be the wood
always away from the body
what do not where in the class
flip flops, sandals, open-toed shoes or soft moccasins
what you have to check the material for
loose knots, staples, nails, screws
clean
your work area
what you have to do before cutting
draw relief cuts
when using hand power tools…
be aware of where the electrical cord is to avoid cutting it
tool must
be in the off position before plugging it
do not place tool down until
off and stopped moving
never start tool if
it is touching the wood
where do i keep the footplate when using the jigsaw
flat on the wood
plastic tubular should be
1/2 above wood
stay back of
pinch points
what does class A fire involve?
ordinary combustibles
what does class B fire involve?
flammable liquid fires
what does class C fire involve?
electrical
what does class D fire involve?
ignitable metals
points to remember while a fire 1
knows whats burning
poins to remember while a fire 2
know what kind of extinguisher you need
most class A activation
remove the locking pin, point to the base of the flames, and squeeze trigger handle
what type of fire extinguisher we have?
dry chemical, type a,b,c
avoid backing
out of cut
where to place the fingers while cutting
each side of the cut line
upper blade should be
1/2 above
how to guide the work
slowly, do not force
make sure all
adjustments are tight and secure
how to operate a drill press
tighten Chuck and remove key
table drill press
loosen the table lock level prior to raising the table
how you tight the wood to the table
c clamp
