Rig Drills Flashcards
E1
Engine
Cummins ISM 450 4 stroke, inline 6 cylinder 450hp at 2100rpm 1,550 foot pounds of torque at 1200 rpm 661 cu in displacement 34q of 15w/40 engine oil 65 gallon gas tank type 2 diesel
E1
Transmission
Allison world Evs 4000
5 speed automatic transmission with touch pad controls
E1
Brake system
Meritor wabco dual abs air brake system
Service brakes and maxi brakes
Service consist of primary and secondary brakes with air pressure overcoming spring tension
Maxi brakes working with spring tension activating with a lack of air pressure
E1
Generator
Onan 2800 microlight 2.8 kilowatt generator
Produces 120v
Powers electrical outlets, 750w telescoping lights, 12v battery charger
5 gal gas tank, 10 hrs of use.
E1
Pump
Hale Qmax single stage, mid ship, centrifugal class a pumper
150 psi it will pump 100% of pumps capacity at draft, 1504 gpm
200 psi it will pump 75% of pumps capacity at draft, 1081 gpm
250 psi it will pump 50% of pumps capacity at draft, 750 gpm
40 gal class b foam
10 gal class a foam
Hale foam pro system can measure from .1% to 10% concentration
E1
Hose
4,841 feet
E1
Ladders
42 feet aluminum ladders
T1
Specs
2006 KME tractor drawn arial leader truck City ID # 15995 55' 6" L 9' 6" W 11' 2" H 8" ground clearance 18' W outriggers fully extended 75,500 lbs
T1
Engine
Cummins ISM 500 turbo charged diesel engine 4 stroke, inline 6 cylinder 500 HP at 2100 rpm 1,550 foot pounds of torque at 1200 rpm 661 cu in displacement 34 q of 15w/40 engine oil 58 q of 50/50 coolant 65 gal gas tank type 2 diesel
T1
Transmission
Allison World EVS 4000
5 speed automatic transmission with touch pad controls
2 PTO’s
Generator PTO and Aerial Ladder PTO
T1
Aerial Ladder PTO
Powers the positive displacement rotary vein hydraulic pump that articulates the aerial ladder
T1 Aerial Ladder
100’ from ground to the tip of the ladder
500 lb tip capacity
2000 lb capacity at 70 degrees
-5 to 80 degrees fully extended
4 section steel truss construction reinforced with k frames and rungs with k braces
IQAN system (Intelligence communication area network) maintains safety and stability of aerial when thrown
EPU (emergency power unit) give 7 min. of emergency power to bed aerial and requires 1.5 hrs of cooling afterwards
T1 Generator PTO
Activated with transmission and gives power to the 10kw harrison generator which gives power to:
electrical outlets
750w lights
JL AC SI 220 hydraulic pump
Monitored by ESKEY System to prevent overloading
T1 Hurst Hydraulic Pump
220v, 2 stage, co-axial piston type pump.
5000 psi through 2-100’ hydrualic lines.
T1 Hurst Tools
MOC II Cutters- 152,870 lbs, 7”.
ML 28 spreaders- 44,000 lbs spreading, 20,000 lbs pulling, 28”.
ML 16S II Combo- 60,000 lbs cutting, 13,000 lbs spreading, 9”.
T41 Ram- 30,000/15,000 lbs, 41”
T59 Ram- 30,000/15,000 lbs, 59”