Respiration and Breathing Flashcards
State Laplace’s and Fick’s laws:
LaPlace’s:
Pressure = 4(surface tension)/r
In alveoli divide by two as only one surface is a liquid-gas interface
Fick’s law:
dQ/dt = (Δp x A x d)/t
Diffusion rate = (Δpartial pressure x diffusion coefficient x area)/thickness.
d ∝ sqrt(molecular weight)
What is Henry’s law and what does it describe?
Describes concentration of gas in blood:
Concentration = partial pressure x solubility
[Blood O2] = (1.39 x [Hb] x % saturation) + (0.003 x PO2)
Don’t forget the dissolved O2!!
Partial pressure = (atmospheric pressure - 47) x (%gas/100) in mmHg from DRY percentage
What is functional residual capacity and how is it created?
FRC: the point at which elastic recoil forces inwards equals the outward forces from the chest wall.
What is a collapsed lung?
- A breaking of the air-tight seal of the interpleural space
- Meaning negative pressure not maintained.
- Therefore force inwards due to elastic recoil overcomes force outward = collapse inwards
What is compliance of the lung? What does it depend on?
ΔP/ΔV (gradient) = the pressure required to cause a given volume change.
Human lung shows marked hysteresis (lung volume at given pressure is larger on deflation
- Rigidity
- Shape of thoracic cage
- Expanding muscle strength
- Elastic properties (e.g. surface tension)
- Lung size
What is specific compliance?
- Compliance divided by functional residual capacity
- Adjusts for lung size
- Roughly constant throughout animal kingdom
What is regional compliance of the lung?
- Lung is more compliant at the base (maybe due to more surfactant)
- Pressure also higher in base due to gravity meaning larger volume expansion at base (for same mean pressure)
- Leads to base accepting a disproportionately large fraction of tidal volume
- During expiration opposite effect seen (base constricted more)
How can regional compliance/tidal volume distribution be shown?
- (133)Xe gas inhaled with oxygen and the radiation distribution measured
- Graph drawn to show data (unit volume against distance up lung gives +ve proportional relationship during inspiration)
Define trans total pressure; transmural pressure; trans chest wall pressure and transpulmonary pressure.
Trans chest wall pressure = pressure inside lung – atmospheric pressure
Transmural pressure = pressure inside - pressure outside
Trans chest wall pressure = pleural space pressure – atmospheric pressure
Transpulmonary pressure = pressure inside lung - pleural space pressure
What are the effects of abnormally high and low lung compliance?
Compliance effects FRC
Abnormally high compliance (distensible lung):
- Elastic properties reduced (recoil force less)
- Exhaling becomes energy expensive as FRC now at much larger volume
- E.g. emphysema
Abnormally low compliance (stiff lung):
- More work required to increase -ve pressure high enough to expand lung
- Occurs during scarring/fibrosis e.g. after irritant exposure (silica/carbon particles, smoking)
What factors affect lung compliance? Give examples.
Shape and rigidity of thoracic cavity:
- Extreme obesity can deform thorax, reducing compliance
- Fat deposits/deformation may narrow airways (increased resistance)
- Increased force required to expand thoracic cavity due to surrounding tissue (not compliance but added factor)
Surface tension:
- Generated by air-liquid interface (LaPlace law)
- Hugely affected by surfactant: shown by IRDS
What do the Von Neergaard experiments show?
- Replaced air with saline solution to inflate lung
- Recorded pressure required to reach certain volume
- Pressure was much lower using saline and showed very little hysteresis
- Showed that surface tension accounts for large proportion of lung stiffness.
How does pulmonary surfactant work?
- Surfactant molecules are highly organised due to their strong polarity (DPPC molecules)
- Forms a layer on inner surface stopping water from depositing and thereby reducing surface tension of lung
- Its ability to dynamically change in thickness during inhalation/expiration could explain hysteresis of lung compliance.
How is pulmonary surfactant produced?
- Secreted by type II alveolar cells from precursors: glucose/choline/palmitate
- High turnover rate due to continued removal of surfactant on inner alveolar surface
- Forms highly organised (due to polarity) DPPC
What are the roles of surfactant?
- Keeps lung dry (stops high surface tension of a water layer)
- Reduces water being drawn out from capillaries
- Reduces overall surface tension of lung, hence also compliance and therefore, work required to breath
- Allows alveoli of different sizes to coexist: normally there is increased pressure in smaller alveoli (forces air out causing collapse), surfactant opposes this by reducing surface tension inversely to increased pressure, allowing expansion
Give evidence for surfactants’ role:
- IRDS: premature babies babies (alveolar type II cells not yet formed) who have limited surfactant struggle to breath due to increased surface tension
- Thoracic surgery patients who do not breath deeply for a period of time, leading to poor surfactant distribution and atelectasis also struggle.
How might the structure of surfactant explain hysteresis of lung compliance?
- Magnitude of surfactant effect is dependent on the surface area and thickness of layer
- Due to structure, thickness can change between inhalation and exhalation
- Surfactant can expand (unlike most liquids) during inhalation = relatively thinner until molecules forced out of layer
- On expansion, molecules are fitted in again (harder) so lung relatively MORE compliant on exhalation
What is a langmuir trough and what does it show?
- Set up: very stable tray containing test liquid with a high sensitivity force transducer, the force required to move the transducer perpendicular to the surface is the St.
- Area of the surface can be changed to simulate lung volume changes
- Surfactant is special as it reduces surface tension dependent on surface area
What factors affect resistance to airflow in the lungs?
Think Poiseuille’s’ law: (8ηl/πr^4)
Radius of airways:
- Increased on inhalation as small airways are suspended in parenchyma which connects them to surrounding tissues.
- Contraction state of smooth muscles under parasympathetic control (ACh causes constriction and mucus secretion; adrenaline causes dilatation and mucus inhibition)
- PCO2 induces dilatation
Viscosity of gas increases resistance to movement.
Mucus secretion also increases resistance.
What is the equal pressure point?
- Must always be a pressure gradient towards to mouth during expiration
- Therefore pressure inside airways decreases along length
- At some point the pressure inside = inward pressure from pleural contraction
- Transmural pressure = 0
This is EPP.
What are the consequences of the EPP in the lungs?
Limits flow rate of expiration due to potential airway collapse:
- Intrathoracic pressure increases during expiration (to create pressure gradient)
- Alveolar recoil and added pressure from contraction of pleural space increases pressure inside airways
- The steeper the pressure gradient, the lower EPP.
- Gradient must be shallow enough to make sure EPP occurs in supported airways (with cartilage rings)
What factors control where EPP occurs?
- Lung compliance (since added to recoil) - shown by low EPP in emphysema
- Strength of thoracic muscle contraction