Required practical 3 - Electrolysis Flashcards
How do you set up a general electrolysis experiment?
- Place the positive and negative electrodes in a beaker containing a molten or dissolved ionic compound.
- Connect both electrodes to a power supply at 4V with wires.
How could you investigate what happens when an aqueous solution of CuCl₂ is electrolysed?
- Half fill a beaker with aqueous CuCl₂.
- Place a lid on the beaker and insert the electrodes into the solution through holes in the lid (electrodes must not touch).
- Connect the electrodes to a low voltage power supply.
- Switch the power supply on to 4V.
- Turn off the power after a few minutes and record any observations.
What forms at the cathode and the anode in electrolysis?
Cathode: metals or hydrogen.
Anode: non-metals.
What would you observe at each electrode when copper chloride solution is electrolysed?
Positive electrode - bubbles of gas (chlorine).
Negative electrode - electrode coated with a brown solid (copper).
Why must the positive electrode (anode) be regularly replaced?
The positive electrode is made of carbon and will react with oxygen to produce carbon dioxide.
Write half equations for the reactions that occur at the electrodes when aqueous CuCl₂ is electrolysed
Cathode: Cu²⁺ + 2e⁻ → Cu
Anode: 2Cl⁻ → Cl₂ + 2e⁻
Write half equations for the reactions that occur at the electrodes when aqueous NaCl is electrolysed
Cathode: 2H⁺ + 2e → H₂
Anode: 2Cl⁻ → Cl₂ + 2e⁻
In the electrolysis of NaCl, hydrogen is produced at the cathode. Why is sodium not produced?
Hydrogen is produced because sodium is more reactive than hydrogen.
Sodium remains in the solution.
How could you test that chlorine gas was produced at the anode?
The gas produced will bleach damp litmus paper - it will turn white.
How could you test that hydrogen gas was produced at the anode?
The gas produced will make a squeaky pop with a lighted splint.
How could you test that oxygen was produced at the anode?
The gas produced will relight a glowing splint.
