Random Chief questions Flashcards
BISP Chapt. 5 REF#1.7
An alarm activation resulting from a utility power fluctuation use what code?
BISP Chapt. 5 REF#1.7
An alarm activation resulting from a utility power fluctuation use a 10-40-2.
BISP Chapt. 5 REF#1.7
An alarm activation that is unwarranted or unnecessary transmit a 10-?
BISP Chapt. 5 REF#1.7
An alarm activation that is unwarranted or unnecessary transmit a 10-35
BISP Chapt. 5 REF#1.7
An alarm activation that is caused by a defective condition of alarm device,equipment or system transmit a ?
BISP Chapt. 5 REF#1.7
An alarm activation that is caused by a defective condition of alarm device,equipment or system transmit a 10-35 no code
BISP Chapt. 5 REF#1.7
An alarm activation that is caused by a low battery transmit a 10-?
BISP Chapt. 5 REF#1.7
An alarm activation that is caused by a low battery transmit a 10-35 no code.
BISP Chapt. 5 REF#1.7
An alarm activation without any known cause when no condition is found warranting an emergency response. Transmit what code?
BISP Chapt. 5 REF#1.7
An alarm activation without any known cause when no condition is found warranting an emergency response. Transmit a 10-35 no code.
BISP Chapt. 5 REF#1.7
What is the difference between a 10-35-no code and 10-35 with a code?
BISP Chapt. 5 REF#1.7
The difference is a 10-35-no code is unwarranted and 10-35 with a code is unnecessary.
BISP Chapt. 5 REF#1.7
What is a 10-35 with a code?
BISP Chapt. 5 REF#1.7
A 10-35 with a code is for an alarm device, equipment or system acting properly but unnecessarily activated by lack of due care.
BISP Chapt. 5 REF#1.7
What is a 10-35 code 1?
BISP Chapt. 5 REF#1.7
A 10-35 code 1 is an unnecessary alarm caused by alarm system testing or servicing
BISP Chapt. 5 REF#1.7
A 10-35 code 2 is?
BISP Chapt. 5 REF#1.7
A 10-35 code 2 is an unnecessary alarm caused by construction activities.
BISP Chapt. 5 REF#1.7
A 10-35 code 3 is?
BISP Chapt. 5 REF#1.7
A 10-35 code 3 is an unnecessary alarm caused by ordinary household activities.
BISP Chapt. 5 REF#1.7
A 10-35 code 4 is?
BISP Chapt. 5 REF#1.7
A 10-35 code 4 is an unnecessary alarm caused by other known cause.
BISP Chapt. 5 REF#1.7
Which 10-35 code requires a NYFIRS report?
BISP Chapt. 5 REF#1.7
10-35 code 4 requires a NYFIRS report setting forth the cause and relevant particulars.
BISP Chapt. 5 REF#2.1 High Priority Referral report
The Administrative BC shall use a separate High Priority Referral report for each what?
BISP Chapt. 5 REF#2.1 High Priority Referral report
The Administrative BC shall use a separate High Priority Referral report for each address or premises and each case/enforcement work for the same address or premise
BISP Chapt. 5 REF#2.1 High Priority Referral report
The Administrative BC responds to a special call for two bldgs. one. with illegal/defective gas piping and the structural stability of one of the buildings is in question. How many high priority referral reports should the BC send?
BISP Chapt. 5 REF#2.1 High Priority Referral report
I believe 2.
BISP Chapt. 5 REF#2.1 High Priority Referral report
Are photographs mandatory?
BISP Chapt. 5 REF#2.1 High Priority Referral report
Photographs are mandatory whenever the condition can be captured this way.
BISP Chapt. 5 REF#2.1 High Priority Referral report
Photographs are always forwarded to whom?
BISP Chapt. 5 REF#2.1 High Priority Referral report
Photographs are forwarded to DOB not just when requesting a joint inspection.
BISP Chapt. 5 REF#2.1 High Priority Referral report
Ensure that from the report the exact location of the hazard can be determined. The endorsement box can be used to describe the location using FD terminology. Fwd report how and to whom?
BISP Chapt. 5 REF#2.1 High Priority Referral report
Forward the report and photos as an Email to Administrative Division
(T.Bs). Upon completion of operations where the KO curtain has been deployed The I.C. will take what action?
The IC will secure the KO Curtain until the arrival of the Safety Battalion or their designee. (TBS Tools 2)
(T.Bs). Upon completion of operations where the KO curtain has been deployed The I.C. will take what action if the safety battalion os not available?
If Safety Battalion is not
available, the IC will secure the device and notify R&D. (TBS Tools 2)
Under no circumstances can the K.O. curtain be deployed for drill purposes. T/F
True.Under no circumstance is a company’s KO Curtain to be deployed for drill purposes.
What effect will the K.O. curtain or the fire Window Blanket have when deployed?
Testing conducted by the FDNY and NIST (National Institute of Technology) showed an immediate 50% decrease in temperatures and significant flame reduction when the Fire
Window Blanket is deployed, but there will be an increase in the smoke condition
produced by the fire
Who shall deploy a spotter to observe the deployment of the blanket from the exterior?(TBS Tools 3)
The assigned unit or IC shall
designate a spotter to observe the deployment of the blanket from the exterior.
Just before the window blanket is put into place the I.C. shall take what action?
Just before the blanket is put in place, the IC must make a handi-talkie announcement to all units. All units must be instructed to report any adverse conditions caused by the
blanket being put in place
Incident Commanders shall be aware that if progress is not being made in the initial fire room where a KO curtain has been deployed what might occur?
fire may extend and additional Window Blankets or KO Curtains may be needed in
anticipation of further window failure.