Quiz 3

Question 1

According to book 29. Nailing blocks are usually made from 2x4” laid flat between rafters to provide a nailing surface for the edge of the plywood sheathing. A nailing block is usually found every how many feet?

Answer 1

4 Feet

Question 2

According to book 29 truck operations manual a plug cut is a small triangular piece of roof covering that is removed from the roof to expose and determine what?

Answer 2

Sheathing type and roof composition thickness

Question 3

According to book 29 truck operations manual this type of cut is a light cut made with a chainsaw that is cutting through the roof covering and plywood sheeting

Answer 3

Skim cut

Question 4

According to book 29 truck operations manual, if the rafter type in direction or unknown, this type of cut will tell you rafter type, rafter direction, the sheathing type, the thickness of the roof composition and act as a what?

Answer 4

45° inspection cut; smoke indicator hole

Question 5

According to book 29 truck operations manual, when using the dicing technique, after the chainsaw operator makes the _____ the puller can start pulling boards. Fill in the blank

Answer 5

Third Cut