Quiz 2- SFC

Question 1

what do you press to verify the expression if there are any error or mistakes in it?

Answer 1

Parse

Question 2

Which SFC element finishes the content of the sequence?

Answer 2

Termination

Question 3

What SCALING PARAMETER of the function block, BPCS_LIC_101\PID1, properly
scales the inlet measured variable to th elevel controllers summing
block?

Answer 3

FF_SCALE

Question 4

WParameter of FB “LEVELSIM_100\INT1. constrains the simulated level to 115?

Answer 4

SP

Question 5

What expression or evaluatio, should be in TERMINATION if SFC is returning to
idle state, at its beginning?

Answer 5

TRUE

Question 6

scaling parameter of BPCS_LIC_101\PID1 that scales the outlet flow remote SP
from lvl controller?

Answer 6

OUT_SCALE

Question 7

What ACTUAL MODE in cascade master BPCS_LIC_101 in when its target mode
is AUTO, and the cascade slave BPCS_FIC_104 in AUTO?

Answer 7

target “AUTO”/ actual “IMAN”

Question 8

what parameter of the FB LEVELSIM_100\INT1, adds a NEGATIVE SIGN to the
IN2.CV floating point?

Answer 8

REVERSE_FLOW2

Question 9

how would an operator START SFC?

Answer 9

Open up DELTAV OPERATE, and press
START on the HMI

Question 10

What is the proper procedure to add an ACTION to a STEP?

Answer 10

Select the STEP,
right click the step action viewer and select “ADD”

Question 11

Which of the modules will contribute to feedforward value (FF_VAL) to the
cascade master BPCS_LIC_101 for the TANK process to maintain MATERIAL
BALANCE?

Answer 11

BPCS_FIC_1200 (inlet)

Question 12

actual mode is the cascade master BPCS_LIC_101 in when its target mode is
AUTO, and the CASCADE slave BPCS_FIC_104 is in CAS?

Answer 12

target “AUTO”/ actual “CAS”