Quantities

Question 1

Minimum BAT voltage during preflight battery check

Answer 1

More than 25.5 volts

Question 2

What charging parameters should you see on the DC electric page after turning all BATs back to ON during the Preflight Battery Check

Answer 2

Less than 60 amps and decreasing w/in 10 seconds of BATs ON

Question 3

If any of the BATs are 25.5 volts or less OR after 10 seconds you have a battery charging at 60+ amps, what should you do?

Answer 3

By reconnecting the batteries during the testing process, you have already started a charging cycle. Once the charging cycle is complete (BATs disconnected on the DC ELEC pg, approx 20 min) Redo the ELEC Test

Question 4

Minimum BAT voltage for an APU start on Battery Power?

Answer 4

23.5 Volts

Question 5

Minimum Hydraulic Qty

Answer 5

Within Green Bands

Question 6

Minimum Cockpit O2 Press

Answer 6

1,000 psi

Question 7

Minimum Eng Oil Qty

Answer 7

16 qts. May be less (-900 Only) provided you have an ETOPS PDC, “Service Check”, or “Transit Check”

Question 8

At what temperature should the Flap Lever be left in conf 1 after landing?

Answer 8

30* C or greater. Prevents nuisance AIR WING LEAK warnings

Question 9

Minimum Water/Waste Quantities

Answer 9

Waste- “Acceptable Level”
Water- 75% or
Flights > 10 hrs- 100% or
Africa- 100%

Question 10

Fire Extinguisher

Answer 10

Green Band

Question 11

Rain Repellant

Answer 11

Green Band