Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

p11 > q_1-25 > Flashcards

q_1-25 Flashcards

1
Q

Which CLI command is used to simulate traffic going through the firewall and determine which Security policy rule, NAT translation, static route, or
PBF rule will be triggered by the traffic?
A. check
B. find
C. test
D. sim

A

C. test

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

An organization has Palo Alto Networks NGFWs that send logs to remote monitoring and security management platforms. The network team has
reported excessive traffic on the corporate WAN. How could the Palo Alto Networks NGFW administrator reduce WAN traffic while maintaining support for all the existing monitoring/security platforms?
A. Forward logs from firewalls only to Panorama and have Panorama forward logs to other external services.
B. Forward logs from external sources to Panorama for correlation, and from Panorama send them to the NGFW.
C. Configure log compression and optimization features on all remote firewalls.
D. Any configuration on an M-500 would address the insufficient bandwidth concerns.

A

A. Forward logs from firewalls only to Panorama and have Panorama forward logs to other external services.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

A customer wants to set up a VLAN interface for a Layer 2 Ethernet port.
Which two mandatory options are used to configure a VLAN interface? (Choose two.)
A. Virtual router
B. Security zone
C. ARP entries
D. Netflow Profile

A

A. Virtual router
B. Security zone

argg best out of 2

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

An administrator has been asked to configure a Palo Alto Networks NGFW to provide protection against worms and trojans.
Which Security Profile type will protect against worms and trojans?
A. Anti-Spyware
B. Instruction Prevention
C. File Blocking
D. Antivirus

A

D. Antivirus

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

A company needs to preconfigure firewalls to be sent to remote sites with the least amount of preconfiguration. Once deployed, each firewall must
establish secure tunnels back to multiple regional data centers to include the future regional data centers.
Which VPN configuration would adapt to changes when deployed to the future site?
A. Preconfigured GlobalProtect satellite
B. Preconfigured GlobalProtect client
C. Preconfigured IPsec tunnels
D. Preconfigured PPTP Tunnels

A

A. Preconfigured GlobalProtect satellite

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

An administrator has been asked to configure active/passive HA for a pair of Palo Alto Networks NGFWs. The administrator assigns priority 100 to
the active firewall.
Which priority is correct for the passive firewall?
A. 0
B. 99
C. 1
D. 255

A

D. 255

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

An administrator pushes a new configuration from Panorama to a pair of firewalls that are configured as an active/passive HA pair.
Which NGFW receives the configuration from Panorama?
A. The passive firewall, which then synchronizes to the active firewall
B. The active firewall, which then synchronizes to the passive firewall
C. Both the active and passive firewalls, which then synchronize with each other
D. Both the active and passive firewalls independently, with no synchronization afterward

A

D. Both the active and passive firewalls independently, with no synchronization afterward

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

An administrator cannot see any Traffic logs from the Palo Alto Networks NGFW in Panorama reports. The configuration problem seems to be on
the firewall. Which settings, if configured incorrectly, most likely would stop only Traffic logs from being sent from the firewall to Panorama?

A

B no log fwd profile, only log at session start and session end)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

When configuring a GlobalProtect Portal, what is the purpose of specifying an Authentication Profile?
A. To enable Gateway authentication to the Portal
B. To enable Portal authentication to the Gateway
C. To enable user authentication to the Portal
D. To enable client machine authentication to the Portal

A

C. To enable user authentication to the Portal

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

If a template stack is assigned to a device and the stack includes three templates with overlapping settings, which settings are published to the
device when the template stack is pushed?
A. The settings assigned to the template that is on top of the stack.
B. The administrator will be promoted to choose the settings for that chosen firewall.
C. All the settings configured in all templates.
D. Depending on the firewall location, Panorama decides with settings to send.

A

A. The settings assigned to the template that is on top of the stack.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Which method will dynamically register tags on the Palo Alto Networks NGFW?
A. Restful API or the VMware API on the firewall or on the User-ID agent or the ready-only domain controller (RODC)
B. Restful API or the VMware API on the firewall or on the User-ID agent
C. XML API or the VMware API on the firewall or on the User-ID agent or the CLI
D. XML API or the VM Monitoring agent on the NGFW or on the User-ID agent

A

D. XML API or the VM Monitoring agent on the NGFW or on the User-ID agent

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Question #12 Topic 1
How does an administrator schedule an Applications and Threats dynamic update while delaying installation of the update for a certain amount of time?
A. Configure the option for Threshold .
B. Disable automatic updates during weekdays.
C. Automatically download only and then install Applications and Threats later, after the administrator approves the update.
D. Automatically download and install but with the disable new applications option used

A

A. Configure the option for Threshold .

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Question #13 Topic 1
To connect the Palo Alto Networks firewall to AutoFocus, which setting must be enabled?
A. Device>Setup>Services>AutoFocus
B. Device> Setup>Management >AutoFocus
C. AutoFocus is enabled by default on the Palo Alto Networks NGFW
D. Device>Setup>WildFire>AutoFocus
E. Device>Setup> Management> Logging and Reporting Settings

A

B. Device> Setup>Management >AutoFocus

(appears once license is loaded)
(no more autofocus, now cortex xdr, etc,,)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Question #14 Topic 1
An administrator encountered problems with inbound decryption. Which option should the administrator investigate as part of triage?
A. Security policy rule allowing SSL to the target server
B. Firewall connectivity to a CRL
C. Root certificate imported into the firewall with Trust enabled
D. Importation of a certificate from an HSM

A

A. Security policy rule allowing SSL to the target server

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Question #15 Topic 1
Which two virtualization platforms officially support the deployment of Palo Alto Networks VM-Series firewalls? (Choose two.)
A. Red Hat Enterprise Virtualization (RHEV)
B. Kernel Virtualization Module (KVM)
C. Boot Strap Virtualization Module (BSVM)
D. Microsoft Hyper-V

A

B. Kernel Virtualization Module (KVM)

D. Microsoft Hyper-V

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Question #16 Topic 1
Which User-ID method maps IP addresses to usernames for users connecting through an 802.1x-enabled wireless network device that has no native integration with PAN-OS®ֲ software?
A. XML API
B. Port Mapping
C. Client Probing
D. Server Monitoring

A

A. XML API

17
Q

Question #17 Topic 1
Decrypted packets from the website https://www.microsoft.com will appear as which application and service within the Traffic log?
A. web-browsing and 443
B. SSL and 80
C. SSL and 443
D. web-browsing and 80

A

A. web-browsing and 443

18
Q

Question #18 Topic 1
Which PAN-OS®ֲ policy must you configure to force a user to provide additional credentials before he is allowed to access an internal application that contains highly-sensitive business data?
A. Security policy
B. Decryption policy
C. Authentication policy
D. Application Override policy

A

C. Authentication policy

19
Q

Question #19 Topic 1
A Security policy rule is configured with a Vulnerability Protection Profile and an action of Deny.
Which action will this cause configuration on the matched traffic?
A. The configuration is invalid. The Profile Settings section will be grayed out when the Action is set to Deny .
B. The configuration will allow the matched session unless a vulnerability signature is detected. The Deny action will supersede the perseverity defined actions defined in the associated Vulnerability Protection Profile.
C. The configuration is invalid. It will cause the firewall to skip this Security policy rule. A warning will be displayed during a commit.
D. The configuration is valid. It will cause the firewall to deny the matched sessions. Any configured Security Profiles have no effect if the Security policy rule action is set to Deny

A

D. The configuration is valid. It will cause the firewall to deny the matched sessions. Any configured Security Profiles have no effect if the Security policy rule action is set to Deny

20
Q

Question #20 Topic 1
A user’s traffic traversing a Palo Alto Networks NGFW sometimes can reach http://www.company.com. At other times the session times out. The NGFW has been configured with a PBF rule that the user’s traffic matches when it goes to http://www.company.com.
How can the firewall be configured automatically disable the PBF rule if the next hop goes down?
A. Create and add a Monitor Profile with an action of Wait Recover in the PBF rule in question.
B. Create and add a Monitor Profile with an action of Fail Over in the PBF rule in question.
C. Enable and configure a Link Monitoring Profile for the external interface of the firewall.
D. Configure path monitoring for the next hop gateway on the default route in the virtual router.

A

B. Create and add a Monitor Profile with an action of Fail Over in the PBF rule in question.

21
Q

Question #21 Topic 1
What are two benefits of nested device groups in Panorama? (Choose two.)
A. Reuse of the existing Security policy rules and objects
B. Requires configuring both function and location for every device
C. All device groups inherit settings from the Shared group
D. Overwrites local firewall configuration

A

A. Reuse of the existing Security policy rules and objects

C. All device groups inherit settings from the Shared group

22
Q

Question #22 Topic 1
Which Captive Portal mode must be configured to support MFA authentication?
A. NTLM
B. Redirect
C. Single Sign-On
D. Transparent

A

B. Redirect

?????

23
Q

Question #23 Topic 1
An administrator needs to implement an NGFW between their DMZ and Core network. EIGRP Routing between the two environments is required. Which interface type would support this business requirement?
A. Virtual Wire interfaces to permit EIGRP routing to remain between the Core and DMZ
B. Layer 3 or Aggregate Ethernet interfaces, but configuring EIGRP on subinterfaces only
C. Tunnel interfaces to terminate EIGRP routing on an IPsec tunnel (with the GlobalProtect License to support LSVPN and EIGRP protocols)
D. Layer 3 interfaces, but configuring EIGRP on the attached virtual router

A

A. Virtual Wire interfaces to permit EIGRP routing to remain between the Core and DMZ

24
Q

Question #24 Topic 1
A speed/duplex negotiation mismatch is between the Palo Alto Networks management port and the switch port to which it connects.
How would an administrator configure the interface to 1Gbps?
A. set deviceconfig interface speed-duplex 1Gbps-full-duplex
B. set deviceconfig system speed-duplex 1Gbps-duplex
C. set deviceconfig system speed-duplex 1Gbps-full-duplex
D. set deviceconfig Interface speed-duplex 1Gbps-half-duplex

A

C. set deviceconfig system speed-duplex 1Gbps-full-duplex

25
Q

Question #25 Topic 1
A web server is hosted in the DMZ, and the server is configured to listen for incoming connections only on TCP port 8080. A Security policy rule allowing access from the Trust zone to the DMZ zone need to be configured to enable we browsing access to the server.
Which application and service need to be configured to allow only cleartext web-browsing traffic to this server on tcp/8080?
A. application: web-browsing; service: application-default
B. application: web-browsing; service: service-https
C. application: ssl; service: any
D. application: web-browsing; service: (custom with destination TCP port 8080)

A

D. application: web-browsing; service: (custom with destination TCP port 8080)

p11 (26 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions