Prints Flashcards
Section Reference Symbols are usually shown on floor plans and direct the reader to a section plan for a more detailed Birds Eye view
False
When the term ‘birds-eye’ view is used, what is meant is the:
View from over head
When an owner sees the first set of drawings from the architect, the drawings are called
Concept drawings
Which plan would usually contain the mountain location information for a microwave receptacle
Interior elevation plan
When an extended part of an object in a drawing has a continuous shape and size, space can be saved by drawing a zig zag or wavy line across the object at an angle. This line is called
Break line
The correct dimensions, height and width respectively for a set of plans that is equal to eight sheets of standard letter size paper is
22 x 34 inches
A construction contract consists of a written and signed contract, a set of working drawings and a set of specifications
True
Where would you find the contact information of the consulting engineer for a project
Title block
How many divisions are represented in the current master format of specifications for construction contracts
48
If part of the required work is missed from the electrical or mechanical contracts, who has the right to decide who will complete the work at no extra charge to the owner
The general contractor
Which plan will show what level an apartment towers house panel is on
Riser diagram
Where will the most likely location to find the index of electrical drawings
Page E01
What is the definition of word ‘provide’ as used in these specifications
Furnish and install
Which of the following ratios represents the smallest scale
1:5000
Choose all of the items of information that would be shown on a motor schedule
Overcurrent type,
# of phases,
HP rating,
voltage
Overload type and setting
FLA
Location
Type of control
When does the architect receive the shop drawings
With the completed bid packages
Which drawings will the electrical equipment vendor supply to the prospective contractor
Shop drawings
Each division in a set of specifications is subdivided into three subsections, they are (in no order)
Execution, general, products
The general contractor is responsible overall, for the progress of the project
False
These drawings are retained by the owner for maintenance
As built
The contractor will submit shop drawings with these plans to the architect
Issued for tender
These drawings are used by the trade people to build the project
Issued for construction
the supply authority will examine these drawings
Issued for approval
The engineers will use these drawings to design the project details
Preliminary or concept
A ‘large scale’ plan is a plan where the ratio of the drawing to the actual object being described is close to 1:1
True
