Pre Trip Flashcards

1
Q

What to look for with metal and plastic

A

Not bent broken or cracked

Securely mounted

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Anything that has fluid,

A

No visible leaks

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Anything with air…

A

No audible leaks

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

When approaching the vehicles, examine the three L’s

A

Lights
Leans
Leaks

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

When inspecting the lights, check for

A

Condition: not bent, not broken, securely mounted

They are also clean
They are the proper color

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Under the hood, start from

A

The passenger side, end on the drivers side

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

When checking the coolant overflow reservoir

A

Condition: not bent, broken, not cracked and is securely mounted

Check there are no leaks

The overflow should be at about half

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

When checking the alternator

A

Not bent not broken not cracked, securely mounted

It is belt driven

Test the belt for 3/4 inch of play

The belt has no abrasions, bulges or cuts and it’s securely mounted

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Large hose from the bottom of the radiator leads to

A

The water pump

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

When inspecting the water pump, make sure

A

Not bent, broken , cracked, securely mounted

No visible leaks

Water pump is belt driven(maybe)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Checking a general hose

A

No abrasions, no cuts, bulges

No visible leaks

Securely mounted

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Describe procedure for checking oil

A

I’d pull it out , wipe it off, insert it back in, pull out to check it the oil is at an operating level

At or below full, but above add

Engine must be cooled for accurate reading

The lid is not bent broken cracked and is securely mounted

Not leaks running down the hose which is also not bent broken cracked and securely mounted

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Checking the power steering reservoir

A

Not bent broken cracked and is securely mounted

No visible leaks

Is it at the operating range

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

Inspecting the power steering hose

A

No abrasions no bulges or cuts

No visible leaks

Securely mounted

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

When checking the air compressor

A

Not bent broken cracked , is securely mounted

I hear no audible leaks

It is gear driven

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Steering shaft condition

A

Not bent broken cracked
Is securely mounted into the

Turn for 10degrees of play

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

Steering box condition

A

Not bent broken cracked and is securely mounted

No visible leaks

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

From the steering box extends the pitmen arm, condition?

A

Not bent broken cracked and is securely mounted by the castle nuts and cotter keys

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

Drag link condition

A

Not bent broken cracked and is securely mounted by the castle nuts and cotter keys

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

Inspecting the brake line

A

No abrasions bulges or cuts, no audible leaks

Securely mounted

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

A lean in the truck might indicate

A

Damage to the suspension

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

Upper steering arm

Lower steering arm

A

Not bent broken or cracked

Securely mounted

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

Steering items include

A

Steering shaft
Steering box
Drag link
Upper and lower steering arms

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

Front Spring mounts

Back spring mounts

A

Not bent broken or cracked and is securely mounted

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Front springs
All present Not bent broken cracked and is securely mounted No scissoring , they are aligned
26
U bolts
Not bent broken cracked and securely mounted
27
Shock absorbers and coil springs
Not broken cracked securely mounted | No visible leaks
28
Suspension items include
``` Front and back spring mounts for rear lead springs Coil and leaf Springs U bolts Shock absorbers Tie rod ```
29
Brake chamber
Not bent broken cracked securely mounted No audible leaks
30
Slack adjuster and rod
Not bent broken cracked and securely mounted Pull out on slack adjuster to make sure there's no more than one inch play
31
brake pads
Not bent broken cracked and securely mounted Not worn dangerously thin Free of grease and oil
32
Brake rotors
Not bent broken cracked and securely mounted No signs of heat indicated by bluish color
33
Inner wheel
Not bent broken cracked securely mounted
34
Inner sidewall | Outer sidewall
No abrasions bulges cuts No audible leaks
35
Tire tread
Evenly worn , not wearing to one side Check depth for 4 /32 inch No abrasions bulges or cuts No audible leaks Not regrooved, recapped, or retreaded
36
Rims
Not bent broken cracked and is securely mounted No illegal welds
37
Valve stem
Not bent broken cracked , securely mounted Check pressure with gauge
38
Lug nuts
Not bent broken cracked and is securely mounted All present
39
How do u know lug nuts are secure
No rust trails No shindig threads No damage around the holes
40
Hub seals
Not bent broken cracked Securely mounted No visible leaks
41
Braking system components and wheels
``` Brake line Brake chamber Slack adjuster and rod Brake shoes Brake drum Inner and outer rims Inner and outer tire sidewalls Tread Hub seals Lug nuts Valve stem ```
42
Driver side items
Mirror bracket Door handle Inner door handle Door hinges (bent broken cracked securely mounted) Pins in hinges (lift on door) Door seal (no abrasions bulges or cuts) Steps (clear of debris, not damaged securely mounted)
43
Checking gas tank
Not bent broken cracked securely mounted Tight Rubber seal no abrasions bulges and cuts
44
Examining the frame
Not bent broken cracked No illegal welds Everything secured to it
45
The driveshaft
Not bent broken cracked and securely mounted to the frame Nothing near it to catch onto Free of debris No illegal welds
46
Exhaust
Not bent broken cracked and is securely mounted to frame No visible leaks other than the end of the tail pipe No illegal welds
47
When checking the dual rear wheels
``` Talk about treading on both wheels Evenly worn Minimum of 2/32 depth No abrasions bulges or cuts and is securely no tires not rubbing on each other free of debris Check inner and outer wheels and sidewalls Lug nuts Valve stem Same tires Hub seals ```
48
Checking the mudflap
Not bent broken cracked and securely mounted Not dragging on floor Not rubbing on tires
49
What are we checking for underneath the vehicle
Frame Driveshaft Exhaust system
50
In cab inspection 5 safety items
Seatbelt (not torn cut, frayed, it latches, securely mounted, unleashes) Spare fuses Fire extinguisher (fully charged in the green, securely mounted, correct type) 3 red reflective triangles (not bent broken or cracked, safely stowed in the container which is securely mounted) Honk the horn
51
In cab, talking about mirrors and windshield
Not bent broken or cracked, they are securely mounted They are clean and have no illegal stickers
52
In cab turning key to ON
ABS and other warning lights should come on and go off Turn on defrost and put hand to check Turn on washers and run fluid Wipers are not bent broken cracked and securely mounted Check turn signals and lights to verify their lights on dash work
53
Doing a safe start
Parking brake is set Start vehicle Listen for abnormal sounds, knocking , high pitched noises etc check gauges Oil pressure rising to an operating range Temperatures rising to operating range Volt meter is between 12 and 14 volts Do a parking brake check
54
Additional bus interior inspection
Seats are securely fastened to the floor Aisles and stairwell clear Handhold railing is not bent broken cracked and is securely mounted Emergency exit signs are clearly visible Test emergency exits and inspect for damage
55
Checking the battery
Cables are not corroded Electrical cables are not close to any running parts They are protected in hose with no abrasions cuts or bulges and are securely mounted Check wiring for years cuts and illegal replacements
56
Fuse box under hood
This would have my extra fuses in it, I would check to see that they are in there and that the box itself is not bent broken cracked and securely mounted
57
Air filter
Cover itself is not bent broken cracked and securely mounted I would take it off to check the filter to ensure the engine can breathe properly
58
Checking the transmission fluid
Engine needs to be running for accurate reading Same procedure for checking oil
59
Checking fans blades
All present , not bent broken cracked and securely mounted Free from obstructions and debris
60
Checking coolant level
Engine needs to be cool first But I would take it off and check to see if the coolant is at the proper level The cap is not bent broken cracked and is tightened securely No visible leaks
61
Checking the brake fluid
Reservoir is not bent broken cracked and is securely mounted, The cap is tight, no visible leaks Brake lines are securely clamped and there are no bulges cuts or abrasions No visible leaks
62
Suspension tie rod
Not bent broken cracked and is securely mounted No illegal welds
63
Leaf springs in the back
All present Not broken bent cracked No scissoring No excessive wear
64
Rear axle
Examine transfer case for cracks dents, broken, all bolts tightened and present No leaks