PowerFlex Practice Questions Flashcards
What role do fault sets play in PowerFlex architecture?
providing resilience against node failures
Place the steps in the correct order to change the server BIOS password?
verify the password status is unlocked
change the existing system password
get into the system setup main menu
change the existing setup password
Which factors should be considered when configuring RAID levels in PowerFlex systems?
IO Patterns
Data redundancy
Disk type
Which PowerFlex software allows the cluster to make data available over NAS?
FSN
When designing a PowerFlex solution, why is it important to capture and validate the design with a customer?
to confirm alignment with business goals
Why is it important to integrate PowerFlex solutions with existing security systems?
to enhance overall system security and integrity
Which PowerFlex Manager activity can the system admin role perform?
Lifecycle operations
What is the default value of paths per volume when adding an NVMe host?
8
An engineer must permanently remove a node from a 10 node PowerFlex system. The node is the primary MDM. What must they do before they remove the node to avoid errors and maintain availability?
use PowerFlex Manager to reconfigure MDM roles
Which components of a PowerFlex cluster should be included in a comprehensive backup plan?
MDMs
Storage Pools
A customer in a large enterprise environment is planning to deploy hundreds of internally supported third-party nodes over the next six months What PowerFlex platform must be used for this deployment?
Software only
A customer recently expanded their PowerRex rack solution from two cabinets to five cabinets What should be done to optimize redundancy of the MDM roles?
Add Standby MDMs to Cabinet 3 Cabinet 4 and Cabinet 5
A customer must restore PowerFlex Manager from a previous backup How can they accomplish this task*?
Select Restore Irom the Serviceability page in PowerFlex Manager
In a test-dev PowerFlex appliance environment, there are two Compute Only nodes five Storage Only nodes, and one Management node An architect wants to create Fault Sets using all available servers but is unable to do so What is the cause of this issue?
there are not enough Storage Only nodes.
What is the maximum number of SDSs per protection domain of the PowerFlex rack?
128
An administrator is creating a NAS server with a Standalone Windows server. Creation of trie NAS server fails What is the cause of the failure?
A storage pool for NAS has not been created
Where must a customer go to generate a software troubleshooting bundle?
PowerFlex Manager Serviceability
Which two aspects must be in place before adding a Fault Set? (Select 2)
Protection Domain
Storage Pool
A bank is creating a data center The storage solution must have integrated, fully configured hardware with a single management platform The solution must be supported end-to-end by Dell Which PowerFlex system meets these requirements?
PowerFlex Rack
Which component of the PowerFlex cluster provides server metrics such as telemetry thermal data and sets the server configuration profile?
iDRAC
A volume has a snapshot policy assigned and snapshot creation is failing What is the cause of this issue?
the snapshot is the 61st created by the policy
A user is attempting to write tiles to a Power Flex File share The share was created with default settings and contains approximately 15 000 files Ten days ago the number of files exceeded the soft limit quota but is still below the hard limit quota What happens if the user attempts to write a new file to the share location?
the file is written as the hard limit has not been reached
An administrator is adding an NVMe device to an existing storage pool They provide the following details in the Add Storage Device to SDS dialog box
· Device Path /dev/disk/by-id’Dell_Express_Flash_NVMe_PM1725V6TB_SFF _S2JPNA0J500141
· Device Name NVMe A. 1.6 TB
· Storage Pool SP-1
What is the result of this action’?
the device additional fails due to an invalid path
A customer has ordered five servers with NVDlMMs Each server has 5 x 3 84 TB SAS and 5 x 3 84 T8 NVMe disks They want to ensure that the highest capacity ot storage is available to the system Which design provides the required storage pool structure?
one storage pool and one acceleration pool
Which policy determines the priority of reconstructing data after a failure?
rebuild throttling
An administrator is migrating a vTree for a snapshot to a different storage pool What is a restriction few the migration?
The migration is between storage pools with a different data layout with multiple volumes in the vTree
For what reason would an administrator choose to set the Force Clean SDS option to YES when adding devices to an SDS In the PowerFlex system?
Overwrite existing data on the device during the addition process