Portable Monitor Flashcards
The inlet on the monitor consists of a __NH rocker lug swivel inlet.
4”
Securely tie the monitor to an object capable of withstanding ____of force.
900 lbs or 400kg
The Crossfire Upper Assembly weighs
17 lbs
the Stow-A-Way 800 Base weighs __ pounds, including the integrated 4” in-line shutoff valve that weighs __ pounds
43.7
23
the total weight of the portable monitor is approximately __
61 lbs
The valve is designed to close automatically when the pressure in the monitor exceeds approximately __psi and open again when the pressure drops to that point.
5
It is intended for maximum flows of __ gpm. Task Force Tips has allowed the LAFD to flow up to __ gpm with the portable base as long as it is attached to a loop of loaded 4” supply hose.
800
1000
A tie down strap is provided to secure the portable monitor to an anchor point or to a loop of hose as described on pages 10 and 11. The strap is made of nylon webbing and is __ feet in length
8
When the nozzle is at an angle of __degrees, the force acting sideways is _____ to the force acting downward on the base
45 degrees
Equal
Do nut use the portable monitor under __ degrees
35
At an angle of 35 degrees, (the angle at the elevation safety stop), approximately __ percent of the nozzle reaction force is acting sideways on the base
82
The Crossfire portable monitor has ____tungsten carbide tipped spikes on the legs and the base to resist sliding by digging into the surface the monitor is sitting on
5 or 6
Spikes must be sharp to provide resistance to sliding. Replace any spike if the tip diameter exceeds __ inch.
1/16th
PM is secured with a __ diameter loop with a tie down strap
10
Make the hose connection to the portable base and extend the hose straight back from the portable base at least __
10 feet
