POH CHAPTER 1 - GENERAL Flashcards
1.2 Principle Dimensions and Areas
What is the minimum propeller clearance?
7”
Under normal weight, CG, tire pressure, and strut extension.
1.2 Principle Dimensions and Areas
What is the minimum turning radius?
40’ 3.75”
1.3 Engine
Number of engines:
1
1.3 Engine
Manufacture:
Pratt & Whitney, Canada, Incorporated (P&WC)
1.3 Engine
Engine Model Number:
PT6A-34
1.3 Engine
Engine Type:
Free turbine, propulsion engine incorporating a multi- stage compressor, single stage compressor turbine, and independent single stage power turbine driving the output shaft through integral planetary gearing. A singular annular combustion chamber, 14 simplex fuel nozzles and two igniter plugs comprise the combustion system. Engine accessories are grouped on the rear of the engine.
1.3 Engine
Horsepower:
760 Shaft HP for 5 minutes
633 Shaft HP Max Continuous
1.4 Propeller
Number of Propellers:
1
1.4 Propeller
Propeller Manufacture:
Hartzell Propeller Incorporated
1.4 Propeller
Propeller model number:
HC-B3TN-3D
1.4 Propeller
Number of Blades:
3
1.4 Propeller
Propeller Diameter:
Maximum: 106”
Minimum: 106”
1.4 Propeller
Propeller Type
Constant speed, feathering and reservable
1.4 Propeller
Propeller Angles:
Feathered: 86.3°
Low Pitch: 18.5°
Maximum Reversible: -8.1°
1.5 Fuel
Approved fuels:
Jet A/A1
Jet B
See POH and P&WC SB 1344 for details