Pakenham/Cranbourne- Caulfield group Flashcards
What is the safeworking system from Flinders street to Pakenham East?
Flinders street- South Yarra= ABS
South Yarra- Clayton= CBTC
Clayton- Pakenham East= ABS
What is the speed from Richmond (RMD) to South Yarra (SYR)?
80
What is the speed from South Yarra(SYR) to Hawksburn (HKN)?
60
What is the speed from Hawksburn (HKN) to Oakleigh(OAK)?
80
What is the speed from Oakleigh (OAK) to Huntingdale (HUN)?
95
What is the speed from Huntingdale (HUN) to Dandenong (DNG)?
80
What is the speed from Dandenong (DNG) to Pakenham East (PKE)?
115
What is the speed over the Caulfield Subway?
(On the Pakenham/Cranbourne line- locals)
25
What is the speed on Dandenong platforms 2 and 3?
60
What is the speed from Dandenong (DNG) to Merinda Park (MPK)?
115
What is the speed from Merinda Park (MPK) to Cranbourne (CBE)?
95
What is the speed when arriving at Cranbourne station?
25 as it is a dead-end platform
Where is CBTC in force between?
Between South Yarra and Clayton
What are the terminating locations between South Yarra and Pakenham/Cranbourne? (10 in total)
-South Yarra (UP only)
-Hawksburn (DOWN only)
-Caulfield
-Oakleigh
-Westall
-Springvale
-Dandenong
Pakenham line:
-Berwick
-East Pakenham
Cranbourne line:
-Cranbourne
What are the Stabling locations on the Pakenham/Cranbourne line?
-Westall
-Dandenong
Pakenham:
-Pakenham East
Cranbourne:
-Cranbourne
Who is the controlling signaller in the Metrol controlled area and to Richmond?
The Caulfield signal control panel
Who are the controlling signallers?
South Yarra to Clayton= Sunshine SCC
Westall and Springvale= Westall panel @Dandenong SCC
Dandenong to Hallam= Dandenong @ Dandenong SCC
Berwick to Pakenham East= Pakenham @ Dandenong SCC
Cranbourne= Dandenong SCC
Who is the controlling signaller from South Yarra to Clayton?
(The CBTC Territory)
Sunshine signal control centre
Who is the controlling signaller at Springvale?
The Westall panel at the Dandenong SCC
Can drivers operate the points at Cranbourne?
The EHPM in the yard- YES
On the mainline- NO
Where must highbeam headlights be used on the Pakenham/Cranbourne line?
From Dandenong towards both Pakenham and Cranbourne
Where does the Country Track Force Protection are begin on the Pakenham/Cranbourne lines?
At Dandenong
Who is the controlling signaller for Westall?
The Westall panel @ Dandenong signal control centre
What is used instead of a Caution Order in the CBTC area?
How are they received?
An APA (Alternative Proceed Authority)
They are transmitted
What route indicator is at Caulfield?
(Pakenham/Cranbourne line)
Illuminated arrows
Up arrow= platform 4
Right arrow= platform 3
How many roads are at Westall sidings?
How many cars in each?
9 roads
Road 1= through stabling 2x6/7-car trains
There is no road two
Roads 3-6= maintenance roads, not allowed in unless specially qualified
Roads 7 and 8= ONE 6 car + ONE 6/7 car train
Roads 9 and 10= TWO 6/7 car trains
On the UP dwarf signals at Westall sidings, what do they arrows indicate?
Left arrow= Towards bypass track
Right arrow= Towards Sidings
Who is the controlling signaller for Springvale?
Dandenong- Westall panel
What does the routing at Springvale indicate?
Platform 1
B- Bypass track
Y- Yard
U- Up line
Platform 2
B- Bypass track
Y- Yard
Who is the controlling signaller for Dandenong?
Dandenong signal control centre
Can you get to Pakenham from platform 1 at Dandenong?
No
Only from platform 2 or 3
Who is the controlling signaller at Cranbourne?
Dandenong signal control centre
Can a driver be instructed to operate points at Cranbourne?
Yes
The EHPM within the siding area
Only if instructed, NOT on the mainline
Who is the controlling signaller at Hallam?
Dandenong signal control centre
Who is the controlling signaller at Berwick?
Pakenham panel @ Dandenong signal control centre
Can a driver be instructed to operate points at Berwick?
YES
If instructed the driver may operate the DCPMs
Who is the controlling signaller at Pakenham?
Pakenham panel @ Dandenong signal control centre
Who controls the points at the Pakenham East depot?
Pakenham panel @ Dandenong signal control centre
However all communication must be directed to the Yard Master
What is the speed in the East Pakenham Wash?
3.5km/h
Terminate at South Yarra?
Up only
Arrive 5, change ends
Receive APA (no signal)
Terminate at Hawkesburn
Down only
Arrive 4, change ends
Receive APA
Or
Arrive 3, change ends
Receive proceed
Terminate at Caulfield
Down
Arrive 3 or 4, change ends
Receive proceed on home
Up
Arrive 3, change ends
Receive proceed on home
Terminate at Oakleigh
Down
Arrive 2, change ends
Receive proceed on home
Up
Arrive 1, change ends
Receive proceed on home
Terminate at Westall on DOWN
Down
Arrive 2, change ends
Receive proceed
Or
Arrive 3, detrain, shunt to siding (1, A or B)
Redock to 1 or 2
Terminate Westall UP
Arrive 1, change ends
Receive proceed on DWARF
Arrive 2 (via bypass), change ends
Receive proceed (bypass or down)
Arrive 3 (via bypass), change ends
Receive proceed (bypass only)
Terminate at Springvale
Down
Arrive 1, change ends
Receive proceed (up or bypass)
Arrive 2, change ends
Receive proceed to bypass or yard(no pax)
Up
Arrive 1, detrain
Take Y to sidings, change ends at walking path
Redock to 2
What are the route indicators at Dandenong? (Down direction)
Platform 1:
Must receive Left arrow (CBE)
Right arrow= unwired sidings
Platform 2:
Up arrow= centre track (CBE)
Left arrow= down line (Both)
Platform 3:
Up arrow= down line (Both)
Right arrow= centre line (CBE)
Terminate at Dandenong
Down
Arrive 2 or 3, change ends
Take proceed
Up
Arrive 1, 2 or 3, change ends
Take proceed
1 can only go to CBE
What is the stabling at Dandenong?
4 sidings (1, 2, 3, 4)
1= 4x7car
2= 2x7car
3+4= 1x7car
Access:
1 and 2: platform 3 only
3 and 4: all platforms
What is the stabling at Cranbourne?
6 roads (3-8)
1x7car each
Access:
Platform 2
(From 1, drive out, change ends, take dwarf to 2)
EHPM within yard that driver can operate
What are the route indicators at Cranbourne? Down direction
Right arrow- platform 1
Up arrow- platform 2
