PAES 101 : 2000

Question 1

Protective device that prevents dangerous part being reached from side or sides covered.

Answer 1

Shield or Cover

Question 2

Protective device that prevents contact with the dangerous part from all sides.

Answer 2

Casing

Question 3

Protective device that ensures the safety, distance necessary so that the dangerous part cannot be reached inadvertently.

Answer 3

Enclosure

Question 4

Guards shall withstand a perpendicular static load of _______.

Answer 4

1,200N

Question 5

Safety distance for upward reach is _______ for persons standing upright.

Answer 5

2,500mm

Question 6

The diameter of the largest circle that can be inscribed is not less than the distance between two apexes that are furthest apart, and shall meet the same requirements for round openings.

Answer 6

Polygonal openings

Question 7

Considered dangerous for the parts of the body if the appropriate minimum separation distance is not maintained.

Answer 7

Pinching point

Question 8

A foot-guard (toe-board) on all sides, which shall be fitted around the edge of the platform or _______ farther away and shall extend ________ the platform.

Answer 8

Not more than 50 mm

Not less than 75 mm above

Question 9

A guard-rail which shall not be _______ and _______ the platform and an intermediate rail so that the vertical distance between any two rails does not exceed _______.

Answer 9

Less than 1000 mm
Not more 1100 mm above
500 mm

Question 10

Located in a position convenient to the operator`s left foot.

Answer 10

Foot-operated clutches

Question 11

Located in a position convenient to the operator.

Answer 11

Hand-operated clutches