Nozzles and Hose Supplies, Inspection, And Configuration Flashcards
Supply Lines 4 inch
Engines shall carry a minimum of ____ft on the rear
Engines also shall carry a minimum of ____ft pony and (number of ponies) pony section of length determined by fire station leadership team
Tankers shall carry a minimum of ____ft
1000 ft.
One 50ft section and one pony section
1000ft.
Master stream, supply, and standpipe lines
Engines shall carry 3 inch minimum of
Tankers shall carry 3 inch minimum of
300
200
2.5 inch and 1.88 inch
Engines
Engine 2.5
200 ft blitz
2 50ft bundles
Engine 1.88
1150ft
100bumper
200,250
400
2 x 100ft bundles
Tankers shall carry a minimum of _____ 1.88 inch
200 ft
How many 2.5 inch stacked tips nozzles on each rig
Engines 2
Tankers 1
Truck 0
Akron Assault 1.5 nozzles on each rig
Engines 6
Tankers 2
Trucks 0
1.5 inch JS 10 Foam on each rig
Engine 1
Truck 0
Tankers 0
Master stream fog capable of 1000gpms on each rig
Engines 1
Tankers 0
Trucks 1
2.5 inch master stream stack tip with straightner on each rig
Engines 1
Tankers 0
Trucks 0
3.5 inch master stream stack on each rig
Engines 0
Tankers 0
Trucks 1
Mercury Monitor on each rig
Engines 1
Tankers 0
Truck 0
Towers shall not have nozzles on the platform that interfere with the
Basket doors
Hose Numbers
First 2 is the station
3rd
1 1.5
2 2.5
3 3
4 4
5 5
6 6
7 3/4
8 1
9 1.88
Last 2 digits is the hose number
How big are the numerals from the stencil
2 inch
Service test shall be conducted _____ and after a hose has been repaired
Annually
Is there hose life expiration
No
The use of a vehicle mounted pump for hose testing shall ____ be used
NOT
The portable fire hose test pump ____ be used
SHALL
Where can you obtain the portable fire hose test pump
Bat hq via service one
Personnel should not stand closer than ____ft to any hose once pressure exceeds ___ psi
15
100
Maintain the following test pressure for 3 minutes at what lengths/pressures from every hose Fairfax Has minus hard suction
300 psi for forestry, 1.88, 2.5 inch, and 3 inch hose.
220psi for booster
200psi for 4 inch and 6 inch hose
All at 300 ft length
Suction hose shall be attached to an electric vacuum pump and gauge. Hold vacuum for ____minutes at ___ inches of vacuum
10
22
Hose shall be washed with hot or cold water.
Cold
Nozzles inspections occur on the?
First day or after use inspectionn
For a nozzle inspection, no more than ____ teeth missing in a row
3
