Network Fundamentals Flashcards
A straight through cable is also referred to as?
A patch Cable
What kind of devices do you connect together with a cross over cable?
Like devices, such as 2 switches, or 2 routers
Connecting a Switch and a Hub together with a straight through cable is a valid connection. True or False
False. for this to work it would require a Cross over cable.
Name the most commonly used modes of Cisco IOS?
User EXEC mode
Privileged EXEC mode
Global Configuration mode
Interface Configuration mode
What command is used to enter Privileged EXEC mode and where is it entered?
“enable” and it is entered in the User Exec Mode
What command is used to enter Global Configuration mode and where is it entered?
“configure terminal” and it is enter in Privileged EXEC mode
Which protocol has a length field in its header?
UDP
Which protocol has a Window field in its header?
TCP
Whats does TCP and UDP stand for?
Transmission Control Protocol
User Datagram Protocol
Which device(s) creates broadcast domains?
Router
Which device(s) creates collision domains?
Switch or a Bridge
Which command generated the following output?
Vlan Mac Address Type Ports ---- ------------ ------- ----- 1 0040.63d8.ba0a DYNAMIC Fa0/3 1 0004.274c.9ca0 DYNAMIC Fa0/1 1 0040.63d8.bab8 DYNAMIC Fa0/10 1 000f.1fd3.d85a DYNAMIC Fa0/7
show mac-address-table
What are the Network and Broadcast addresses for 192.168.54.23/27
Network 192.168.54.0 /27
Broadcast 192.168.54.31 /27
Increments of 32
At which layer in the OSI model does flow control generally operate?
Layer 4 the Transport Layer.
This Layer is used to manage data transmission between devices, a process know as flow control.
Which Layer of the OSI Model describes the physical medium used for sending and receiving data?
Layer 1 the Physical Layer.