Navigation Operations

Question 1

What CDU function key is used to access the NAV RADIOS page?

Answer 1

CNI x2

Question 2

The VOR can be manually tuned by entering the new frequency in the scratchpad and selecting what key?

Answer 2

RS1

Question 3

What is the default alignment mode for the INUs?

Answer 3

GC ALN

Question 4

True or False: When changing a frequency and identifier on the VOR Preset List, you should change the frequency first, and then add the identifier.

Answer 4

True

Question 5

Each mark (dot) above and below the center mark on the glideslope scale represents how much deflection?

Answer 5

0.25 deg per dot

Question 6

The last VOR frequency can be recalled by entering zero in the scratchpad and selecting what key?

Answer 6

RS1 (LS1 for last manually tuned freq)

Question 7

What is the maximum number of Data Search Items (Airports, Navaids, Fixes, and ACP List items) that can be displayed on the Map at one time if none of these Data Search Items are flight plan points?

Answer 7

20

Question 8

What are the four modes the TACAN can operate in?

Answer 8

R, TR, AAR, AATR

Question 9

Which TACAN mode displays bearing and DME from a ground TACAN station?

Answer 9

TR

Question 10

Which TACAN mode displays DME from another aircraft?

Answer 10

AATR (63 channels apart between aircraft)

Question 11

What CDU page is accessed to initialize the system?

Answer 11

START 2/2

Question 12

What is the DH (Decision Height) default value under the VOR/ILS CONTROL page? Be sure to indicate if this value is AGL or MSL?

Answer 12

200 ft. AGL

Question 13

With the TACAN in the AATR Mode and with a 63 channel seperation, what information will be received from an interrogated CH-47F helicopter (current configuration)?

Answer 13

Distance

Question 14

What CDU page is used to change satellite constellation type between MIXED and ALLY for GPS1?

Answer 14

GPS NAVIGATOR page

Question 15

What are the 3 alignment modes that can be selected to initialize the Inertial Navigation Units?

Answer 15

Gyro Compass (GC ALN), Stored Heading, Ship Alignment

Question 16

Which CDU page is accessed to perform a system shutdown?

Answer 16

POWER Page

Question 17

Which CDU function key is selected to perform a search for closest airports to current position?

Answer 17

DATA, LS2 (airports)

Question 18

On the RUNWAY DATA page, selection of which key puts the postion of the runway approach end into the scratchpad?

Answer 18

Left Line Select Key

Question 19

What information is available on the RUNWAY DATA page for a selected airport?

Answer 19

Runway Designation, Runway Length and Width, Runway Touchdown Zone Elevation

Question 20

True or False: Activating TACAN Point-to-Point (TCNP) on the Flight Director Control Layer will cause automatic pairing of a VORTAC frequency to its associated TACAN Channel.

Answer 20

False

Question 21

When tuning the VOR or ADF radio, what indication on the MFD does the pilot receive when CAAS is searching the DAFIF for a RPID (Reference Point Identifier)?

Answer 21

SEARCHING annunciator

Question 22

To recall the last manually tuned ADF frequency you must enter a zero in the scratchpad and select which bezel key?

Answer 22

LS3

Question 23

Maximum number of ADF presets

Answer 23

20