NAPHTHA UNIT FO TEST Flashcards
Where does the Naphtha Unit receive its charge from?
83 Tank
What would you do if the Naphtha Charge Heater was blowing back?
Call the DCS operator and have them slowly cut back on the fuel gas to the burners until it stops.
When collecting the Naphtha samples using the MACT sample stations….
Make sure the three way valve has been positioned for circulation before opening the valve to collect the sample or else the sample will not be fresh. Thanks
The Naphtha Hydrobon Unit is?
A Naphtha Hydrotreating unit.
The reaction inside the Naphtha Hydrobon reactor…
Is an exothermic reaction.
The reaction inside the Naphtha Hydrobon Reactor
Releases sulfur molecules from the hydrocarbon compounds. The sulfur bonds with hydrogen to form H2S.
The majority of the gas exiting the Naphtha Hydrobon Separator is?
Hydrogen
Water is injected upstream of the Naphtha Hydrobon Fin-Fan Condensers to?
Prevent salt from plugging the fin-fan tubes.
The Hydrogen Supply to the Naphtha Unit normally comes from the?
CCR Unit.
Filmer is injected into the Naphtha Hydrobon to?
Provide a protective coating on the metal surfaces to reduce corrosion.
To what location does the off gas from the Naphtha Stripper OVHD Receiver go?
To a Hydrobon Amine Fuel Gas Absorber.
What vessel/vessels require manual draining in the Naphtha Unit?
The Naphtha Stripper OVHD and the Naphtha KO Drum.
Where is the rip cord located to rapidly depressure the Naphtha Unit to the flare?
Southwest end of the Naphtha Product Separator.
Where does the Naphtha KO Drum drain to?
The Naphtha Stripper Feed.
What will shut the Naphtha Reboiler Heater down?
Low reboiler flow will.
