NAMP CH 3 Flashcards
Which maintenance level primarily includes inspecting, servicing, lubricating, adjusting, and replacing parts, minor assemblies, and sub assemblies of aircraft, unmanned aircraft or unmanned aircraft systems and aeronautical equipment?
O-level
Which maintenance level is performed by designated maintenance activities responsible for supporting units operating aircraft and aeronautical equipment?
I-level
Which maintenance level is performed at or by Fleet Readiness Center sites to ensure continued flying integrity of airframes and flight systems during subsequent operational service periods?
D-level
What are considered the authority for the issue of specific items of Support Equipment (SE)
Individual Material Readiness List (IMRL)
Maintenance functions and policy for guided missiles, aircraft guns, targets, bomb assemblies, rockets, jet awaited takeoff, and pyrotechnics are listed in what?
OPNAV M-8000.16 (NOMP)
How many different ways is Support Equipment categorized as?
2 (Common SE and Peculiar SE)
Who is responsible for managing Marine Air Traffic Control and Landing Systems (MATCALS)?
Commander, Naval Air Systems Command (COMNAVAIRSYSCOM)
Which type of inspection can detect defects with a high degree of accuracy and with no adverse effect upon the use of the part or system being inspected?
Non-Destructive Inspection (NDI)
Who has overall cognizance of the NDI program?
COMNAVAIRSYSCOM
Which classes of ships are exempt from establishing and maintaining an X-ray radiography program?
LHA AND LHD
Which form provides a certification and recertification of Non Destructive Inspection technicians and operators?
Non Destructive Inspection Certification Record (OPNAV 4790/139)
What is the minimum enlisted pay grade required to be designated as a Non Destructive Inspection specialist?
E-7
Method specific NDI training shall be provided to all NDI operators by NDI specialists or TYCOM authorized NDI technicians. This training is required in the following minimum amounts: PT = 4 hours, MT = 4 hours, and ET how many hours?
10
Task-specific training shall be provided in an amount that will vary with complexity of the TD or maintenance technical manuals directed NDI tasks, but shall not be less than how many hours for the first aeronautical part, assembly, or structural feature listed?
4
Supervised work experience shall be provided to all NDI operators by NDI specialists or NDI technicians. Supervised work experience, before the NDI Operator can perform inspections without direct supervision, shall include, as a minimum: PT = 16 hours, MT = 16 hours, and ET = how hours for the first aeronautical part, assembly, or structural feature listed in the applicable TD or maintenance technical manuals directed NDI task and method?
40