MTS

Question 1

Falls in mid wave spectrum

Answer 1

Infrared (IR)

2,000 - 5,000 NM

Question 2

Detects small temperature differences

Answer 2

Infrared (IR)

Question 3

A measure of how well an object radiates thermal energy

Answer 3

Emissivity

Question 4

Has the same optical path as DTV

Answer 4

Low light television

Therefore cannot be fused with DTV

Question 5

LLTV lives In the ______ spectrum

Answer 5

NIR

Near infrared

700-900 NM

Question 6

Transmits a beam of energy to the target to guide laser guided munitions and or provides more accurate ranging data

Answer 6

Laser rangefinder designator

LRD

Question 7

Marks a target location for users of night vision devices. Visible to pilot and sensor operator with the use of the MTS LLTV

Answer 7

Laser target marker

LTM

Question 8

Sensor that does not need visible light

Answer 8

IR does not require light

Question 9

Most important external factor affecting the quality of an IR image

Answer 9

Humidity

Question 10

In IR manual mode what is adjusted when using iris lever

Answer 10

Gain and level

Question 11

In manual DTV mode what settings are adjusted when using the iris lever

Answer 11

Brightness and contrast

Question 12

Which camera mode is susceptible to haze, dust, clouds etc

Answer 12

DTV

If your eye can’t see through it the DTV can’t either

Question 13

Best camera to see lights at night

Answer 13

LLTV

Question 14

On the enerdyne encoder pull down menu what will change the level of control settings (refresh rates)

Answer 14

Q factor control settings

Question 15

Best way to improve upon picture due to humidity, haze, smoke, dust or precipitation

Answer 15

Reduce the slant range

Question 16

Function that compares adjacent pixels to get better image

Answer 16

NUC

Only corrects IR

Question 17

Image function setting that can handle blooming the best

Or explosions and great constrasts

Answer 17

Auto iris

Question 18

Fusion setting that applies 50/50 DTV/IR

Answer 18

128

Question 19

A line extending downward from the MTS perpendicular to the plane

Answer 19

Nadir

Question 20

Nadir cone

Answer 20

5-10 degrees around nadir line

Question 21

MTS can go nadir at

Answer 21

80 degrees

Question 22

When an asterisk appears to the right of the gimbal status indicator operator control is not diminished and operator should not

Answer 22

Initiate reset

Question 23

What mode should be selected before initiating an AN/DAS-1 reset

Answer 23

Rate mode

Question 24

MTS overheat threshold

Answer 24

85 degrees Celsius

Question 25

Track mode designed to maintain a lock on a moving target

Answer 25

Feature track

Question 26

When should a NUC be done

Answer 26

Anytime picture degradation is apparent

Question 27

When should SO not NUC the camera

Answer 27

While looking at an oversaturated IR scene