Motherboards, Processors and Memory Flashcards
Which computer component contains all the circuitry necessary for othe components or devices to communicate with one another?
A. Motherboard
B. CPU
C. RAM
D. Expansion bus
A.
The spine of the computer is the system board, otherwise known as the motherboard. All other computer components plug into the motherboard. On the motherboard, you will find the CPU, underlying circuitry, expansion slots, video components, RAM slots, and various other chips.
You are told by a technician over the phone that you need to bring replacement DDR4 SDRAM memory. What type of packaging is used for DDR4 SDRAM memory?
A. 224-pin DIMM
B. 240-pin DIMM
C. 288-pin DIMM
D. 296-pin DIMM
C.
DDR4 SDRAM is manufactured on a 288-pin DIMM, as is DDR5 (although the two are keyed differently and are not compatible). DIMMs with 224 pins and 296 pins do not exist.
DIMMs with 240 pins are used for DDR2, DDR3 SDRAM.
You need to replace memory in a desktop PC and go to purchase RAM. When you are at the store, you need to find the appropriate type of memory. What memory chips would you find on a stick of PC3-16000?
A. DDR-2000
B. DDR3-2000
C. DDR3-1600
D. PC3-2000
B.
Remember the 8:1 rule. Modules greater than but not including SDR SDRAM are named with a number eight times larger than the number used to name the chips on the module. The initials PC are used to describe the module; the initials DDR are used for the chips; and a single-digit number after PC and DDR is used to represent the level of DDR. The lack of a single-digit number represents DDR as long as the number that is present is greater than 133 (such as PC1600). Otherwise, you’re dealing with SDR (such as PC133). This means that PC3-16000 modules are DDR3 modules and are populated with chips named DDR3 and a number that is one-eight of the module numeric code: 2000.
A client wants you to build a new PC for her, with a smaller case and lower power requirements. When selecting a motherboard, which form factor should you choose for a smaller size and lower power consumption?
A. ATX
B. AT
C. DTX
D. ITX
D.
The ITX motherboard family consists of smaller boards that fit in standard or miniature cases and use less power than their larger counterparts. ATX are “standard” sized motherboards in today’s world. AT is a legacy form factor that was bigger than ATX. There are no DTX motherboards.
A motherboard failed on a desktop PC with an Intel Core i5-10600K processor. When you are looking for a replacement motherboard, which CPU socket does it need to have?
A. LGA 1366
B. LGA 1150
C. LGA 1200
D. LGA 1700
C.
The Core i5-10600K is a Comet Lake-series processor, which uses the LGA 1200 socket, LGA 1150 sockets are for older i7s, and the LGA 1366 socket is for even older ones than that. The LGA 1700 socket is for 12th-generation Intel Core processors.
You have just replaced a processor in a computer and now need to add a cooling mechanism. What should you use to attach the cooling system to the processor?
A. Heat sink
B. Thermal paste
C. Fan
D. Superglue
B.
Thermal paste is used to attach heat sinks and fans to processors. A heat sink usually gets attached to the processor using thermal paste, and then the fan is attached to the heat sink. Superglue would make it adhere, but it does not transfer heat properly - it would likely melt and cause a mess and processor failure.
A technician asks you how to get a computer’s processor to run faster than it currently does. What are they trying to achieve?
A. Hyper-Threading
B. Overclocking
C. Virtualization
D. Multicore support
B.
Overclocking is when someone sets the speed of the processor to run faster than it was rated for. While overclocking can make a computer faster, it can also cause the processor to overheat, and it voids the warranty. Hyper-threading allows for a processor to handle multiple processes simultaneously. Virtualization is when you create multiple virtual machines on a computer. Multicore means that the processor has more than one core - it’s not a configurable option.
You are assembling a new computer and are looking at new cooling systems. Which of the following cooling systems requires the use of a pump?
A. Liquid
B. Thermal paste
C. Heat sink
D. Heat sink plus fan
A.
Liquid cooling systems require a reservoir of liquid and a pump to circulate the liquid. It’s possible that the system could malfunction, causing a mess inside the computer. Thermal paste is used to adhere a heat sink to a processor. Heat sinks and fans do not use pumps.
Which of the following types of processors will likely generally be preferred for mobile devices?
A. x64
B. x86
C. ARM
D. LGA
C.
ARM processors generate less heat than do x64/x86 CISC processors and are therefore better options for mobile devices. LGA is a type of CPU socket.
You press the front power button on a computer and the system boots. Later, you press it briefly and the system hibernates. When you press it again, the system resumes. You press and hold the button and the system shuts down. What is this feature called?
A. Programmable power
B. Soft power
C. Relay power
D. Hot power
B.
Soft power is the feature whereby the front power buttonacts a relay to initiate various system power changes, depending on the duration that the button is held. Programmable power, relay power, and hot power are not valid power options.
You are training new technicians to install RAM and pointing out differences between packages. Which of the following are the numbers of pins that can be found on DIMM modules used in desktop motherboards? (Choose two)
A. 180
B. 184
C. 200
D. 204
E. 232
F. 240
B, F.
DIMMs used in desktop motherboard applications have one of four possible pin counts. SDR SDRAM is implemented on 168-pin modules. DDR SDRAM is implemented on 184-pin modules. DDR2 and DDR3 are implemented on 240-pin modules with different keying, and DDR4 and DDR5 DIMMs have 288 pins but different keying. Older dual-channel DIMM modules have 232 pins. Modules with 200 and 204 pins are used in the SODIMM line, and there are no modules with 180 pins.
You are installing a new computer, and the user wants to use virtualization. Which hardware components need to support virtual technology for this to work properly? (Choose two)
A. RAM
B. Motherboard
C. CPU
D. BIOS
C, D.
For virtualization to work, both the CPU and BIOS need to support it. The operating system does as well. Virtualization support may need to be manually enabled in the BIOS. RAM does not need to support virtualization, and neither does the motherboard (except for BIOS).
You find out that a disgruntled ex-employee’s computer has a boot password that must be entered before the operating system is ever loaded. There is also a password preventing your acces to the BIOS utility. Which of the following motherboard components can most likely be used to return the computer to a state that will allow you to boot the system without knowing the password?
A. Cable header
B. Power reset connector
C. Toggle switch
D. Jumper
D.
Most motherboards have a jumper or similar momentary closure mechanism that will allow you to clear the CMOS memory of any user setting and cause the BIOS to use factory defaults, including no user or supervisor passwords.
Your Core i5 fan has a 4-pin connector, but your motherboard only has a single 3-pin header with the CPU_Fan label. Which of the following will be the easiest solution to get the necessary cooling for your CPU?
A. Plug the 4-pin connector in the 3-pin header
B. Buy a 4-pin to 3-pin adapter
C. Leave the plug disconnected and use only the heat sink
D. Add an extra chassis fan
A.
The easiest solution that works to cool your CPU is to connect the four-pin connector into the three-pin header. The missing pin allows you to control the speed of the fan. Without it, the fan will run at full speed, which is fine, al be it a little noisier. There is no four-pin to three-pin power adapter. The heat sink alone should not be relied upon for proper cooling of modern CPU’s, and an extra chassis fan isn’t designed to specifically help cool the CPU.
You are installing a new video card into a PCIe slot. What is the combined total throughput of a PCIe 2.0 x 16slot?
A. 500 MBps
B. 1 GBps
C. 16 GBps
D. 32 GBps
C.
The PCIe 1.1 specification provided 250 Mbps of throughput per lane per direction. With the 2.x versions of PCIe, this rate was doubled to 500 Mbps. As a result, each v2.0 lane is capable of a combined 1 Gbps. An x16 slot slot consists of 16 lanes, for a total bidirectional througput of 16 Gbps.
