Module D Flashcards
What is a TPU
Tank and Pump Unit
What pump is on a TPU?
50 GPM
3100 RPM
How many gallons to prime the 50 GPM Pump?
5
What size of tanks come with the TPU?
500 or 600
What tank has the filler tube?
500 gallon
Which tank has the jet sensor
500 gallon
Which filter separator is on the TPU?
50 GPM vertical
The 50 GPM separator operates at what PSI?
75
How many filters and canisters in the 50 GPM Separator?
4 and 4
How long is the static discharge reel?
40 ft plus the Y
The dispensing assembly for the TPU is how long and how wide?
40 ft x 1.5 inches
( attached is a 1.5 inch nozzle)
What is the preferred method of loading the TPU tanks?
Bottom loaded via the D1. Levers must be in the closed position
Far side lever is connected to which hose
2 inch by 89 inch hose
Near side lever is connected to which hose?
2 inch by 26 inch hose
How many cables in the cable assembly, and what are they?
2 cables
- On/Off switch
- Inter vehicle (NATO)
First thing we do when arriving at the TPU?
PMCS
Second thing to do when arriving at the TPU
Lowering the tailgate
Distance between TPU and equipment being fueled?
At least 25 ft
What does HEMTT stand for
Heavy Expanded Mobility Tactical Truck
HEMTT designation
M978
How much fuel does the HEMTT hold
2500 gallons
HMETT can ford how much water?
48 inches for 5 minutes
Operating range and side saddle take capacity for HEMTT
300 miles and 154 gallons
HMETT turn radius
105 feet
Grades the HEMTT can climb with and without a trailer
30% with
60% without
Left and right hose reels on the HEMTT are how big?
50 ft long
1.5 inches in diameter
What size pumps does the HMETT have?
300 GPM that high idles at 1500 RPM
25 GPM Auxiliary pump, powered by 24 volts
Fuel/Defuel valve (Valve 6)
Push in for fueling, pull out for de fueling
Pump engagement lever
Push in to engage, pull out to disengage
Suction line valve (V3)
Diverts fuel from the main pump to the auxiliary pump. Located left frame rail under vehicle
HEMTT filter separator. 2 models
Model A
15 filters, 15 canisters
Model B
2 filters, 6 canisters
Both are 300 GPM
Self loading (filtered)
Product is filtered and metered during loading
Self loading non filtered
Product is not filtered during loading
Bulk delivery filtered
Product is filtered and metered during dispensing
M967A1
5000 gallon bulk fuel hauler designed for general Highway and limited cross country use
M967A1 self load and bulk load rates
Self load 300 GPM
Bulk delivery 600 GPM
How many baffles per 1000 gallons?
1
5000 gallon tank will have 5 baffles
Idle range of all tankers
1000-1200
What is a dispensing system?
It’s how we get fuel in and out of a tanker
M967A1 emergency shut off is located where?
Curbside, forward neck
How many hoses on the tankers excluding meter hoses (not m1062)
Roadside has 1 hose, 4X14
Curbside has 2 hoses, 4X14
Total of 3 hoses
Self loading means what?
We use our pump to fill the tank
Valve F unfiltered or filtered
UNFILTERED
H Valve controls what?
Flow from the manifold to the pump
Valve B controls what?
Bulk delivery
Valve A let’s fuel flow from where to where?
Tank to the manifold. Similar to V1 on the HEMTT
Valve D is the Pre Check valve. How long until fuel stops flowing if the float is functional?
20-25 seconds
What valves are open for all operations
A
E
M969A1 is used for what?
Refueling automotive and over wing aircraft
Normal operating rpm of the m969A1
2400
How many water drain valves on the m969a1 filter separator
2
Manual valve N
Automatic drain valve
What valve controls filtered bulk delivery on M969A1
Valve K
Specs of the filter separator on the tankers
15 filters
5 canisters
15 go no go fuses
150 PSI
300 GPM
Valve M
Controls flow from pump outlet to filter separator Inlet
Valve N
Manual water drain valve on filter separator
Valves P and R?
These valves regulate flow through the hose reels.
Valve R is on the right hand side
Valve P controls the left
What is a dry break?
Unisex connector
Hose reel size for tankers
50 X 1.25
Flow rate for the metered delivery on the M969A1 reels
60 GPM
M969A1 how many dispensing assemblies
3
M969A3 purpose
Ground vehicle refuel
What is different about the E valve M969A3
The E valve is now the evacuation valve to empty the hose
How many overfill protections on the M969A3
2.
CIVICON and jet sensor
Meter GPM on M969A3
100 GPM
What is the D valve?
Pre check valve
NOT check valve
J Valve
Water drain from manifold
M967 has how many dispensing assemblies
1
How many dispensing assemblies on the M969A1
3
1 bulk and 2 metered hoses
M1062 is used for what? And what is the capacity?
Used to transport and discharge bulk fuel on improved roads
7500 gallons
How many dispensing assemblies in the M1062
2
First assembly is made of 2 hoses that are 14 ft by 4 inches.
Second assembly is made of 2 hoses that’s are 7.5 ft by 4 inches.
Weights of the M1062
Empty - 11,556
Full - 65,556
ROM stands for?
Refuel On the Move
How many refueling points on the ROM
8
How many soldiers to set up the ROM?
15
What tankers support the ROM?
M969A1-3
Meter resets at what gallon amount
9999