Module 1 Networking Hardware Flashcards
_____________ are physical devices that are required for communication between devices on a computer
Networking Hardware
A bridge is a networking Hardware TRUE or FALSE
TRUE
What is the differences between a networking hardware and a network stack
networking hardware ( hardware only) networking stack(Software and Hardware)
which of these is not a networking hardware
a) Cables b) Hubs c) continuity tester d) None of the Above
c) continuity tester
What is the differences between a switch and a Hub
A hub is a layer 1 device allows noise and collision domain
switch does away with noise and collision domain
________ is device that is able to route data and forward data by inspecting the IP data
Router
Complete the gaps respectively
___________ is used to retransmit signal over long distance
_________ device creates a single aggregate network from multiple communication network or network segment
Repeater
bridge
which of this Networking Hardware is able to perform Modulation and demodulation
a) Ethernet Adapter b) Modem c) Cable tacker d)Hub
b) Modem
A modem uses _________ type of signal to transmit data
Analog signal over telephone network
_______________modem plugs into an expansion slot of the motherboard
_______________ Modem connect through serial and USB ports
Internal Modem
External Modem
_______________ is common to both the internal and external modem
Software driver has to be installed
What is the full meaning of NIC and
what is another name for it
Network Interface Card
Ethernet Adapter
what device performs demodulation only
what device performs modulation only
receiving modem, transmitting Modem
What is Modulation
Conversion of digital to analog
___________ device maintain signal strength while transmitting
Repeater
