Milling

Question 1

milling machine with cutter mounted to arbour, table does not swivel

Answer 1

plain horizontal milling machine

Question 2

milling machine that moves horizontal and capable of swiveling up to 45 degrees in either direction

Answer 2

universal horizontal milling machine

Question 3

milling machine capable of doing horizontal and vertical operations, only able to use shank mounted tools

Answer 3

standard vertical milling machine

Question 4

milling machine most versatile, milling head can be positioned related to the workpiece by moving the ram forward or back

Answer 4

ram type vertical milling machine

Question 5

ram type milling machine is also called

Answer 5

tool room milling machine

Question 6

when a workpiece feeds against the rotation of the cutter

Answer 6

conventional milling

Question 7

when the workpiece feeds with the rotation of the cutter

Answer 7

climb milling

Question 8

end mills can plunge

Answer 8

1/2 diameter of cutter

Question 9

the amount of metal removed by each tooth per revolution

Answer 9

chip load

Question 10

overarms are only on what milling machine

Answer 10

horizontal

Question 11

backlash eliminator should be used when

Answer 11

climb milling

Question 12

spindle nose taper

Answer 12

3.5 inches per foot

Question 13

difference between gearbox vs variable speed drive

Answer 13

gearbox machine off

variable machine on

Question 14

two fluted endmills are also known as

Answer 14

slot drills

Question 15

arbour used in horizontal milling machine, has one bearing support, used for light duty miling

Answer 15

A style arbour

Question 16

arbour used in horizontal milling machine, has two bearing support and used in heavy duty milling

Answer 16

B style arbour

Question 17

arbour used in horizontal and vertical milling with no bearing support

Answer 17

C style arbour

Question 18

adaptor used to fit drill chuck in spindle

Answer 18

jacobs taper adaptor

Question 19

adaptor used to fit large drill containing morse taper

Answer 19

morse taper adaptor

Question 20

what draws the arbor or collet chuck into the spindle of the milling machine

Answer 20

draw bolt

Question 21

what is the most rigid vise for a milling machine

Answer 21

the plain vise

Question 22

used to keep workpiece from shifting under heavy cutting pressures

Answer 22

stop block

Question 23

device used to support extended parts of a workpiece that do not sit directly on the table of the milling machine

Answer 23

jackscrew