mechanical equipment Flashcards
dead weight test gauge
used with the dead weight tester to calibrate pop off valves and used on pressure vessel inspections
dead weight tester
used to test the pressure switches and gauges
oxygen air analyser
used to test the oxygen and combustible gases contained in a confined space. 19.5% to 21%. Under 19.5% is oxygen deprived and over 21% is oxygen enriched.
feeler gauges
used to measure clearances
Dial indicators
used to measure the run out on a piece of equipment
RPM Gauges
used to measure rotational speed of a piece of equipment
Calipers
used to measure the inside diameter or outside circumference
Piezometer
used to measure the pressure or level of water under the surface
M scope
used to measure the water level in a PZ
ball n box
used to measure movement of the monolift joint
weir
used to measure the amount of water flow
magna flex tester (MT)
metal particle test- used to check for cracks in metal (crane hooks)
Radius gauges
used to measure the grooves and radius on an item
Heat stick tester
Used to measure the temperature of a piece of metal. Color coded based on the temp for the stick. The stick will melt once the metal is to the proper tempature.
Vibration monitor
used to test the vibration of a bearing
db Tester
Measures the noise level
Thread gauge
measures the number of threads per inch
combination square
used for layout work
micrometer
inside outside and depth used to measure tolerances
angle finder
used to determine the angle of an item
sheave gauge
used to measure the groove on a sheave
weighted metal tape
used to measure down to and item
Pneumatic Test Stand
used to test pop off gauges. We utilize the Nitrogen to test.
Dye Penetrate
used to check for cracks in metals
Lead Paint Test swab
Used to check for lead in paint .
telescoping gauge
used to check the inside diameter
machinist level
the most accurate way to ensure an item is level
