Mathematics Flashcards
- Select the fraction which is equal to 0.0250.
a. 1/4
b. 1/40
c. 1/400
b. 1/40
- The result of 7 raised to the third power plus the square root of 39 is equal to
a. 349.24
b. 34924
c. 34324
a. 349.24 (calcu)
- What is the speed ratio of an input gear with 36 teeth meshed to a gear with 20 teeth?
a. 9:5
b. 1:0.56
c. 1:1.8
c. 1:1.8
- Express 7/8 as a percent.
a. 8.75 percent
b. 875 percent
c. 87.5 percent
c. 87.5 percent (calcu)
- Which alternative answer is equal to 16,300?
a. 1.63x10 to the fourth power
b. 1.63x10 to the negative third power
c. 163x10 to the negative second power
a. 1.63x10 to the fourth power
- A four cylinder aircraft engine has a cylinder bore of 3.78 inches and is 8.5 inches deep. With the piston on bottom center, the top of the piston measures 4.0 inches from the bottom of the cylinder. What is the approximate piston displacement of this engine?
a. 200 cubic inches
b. 360 cubic inches
c. 235 cubic inches
a. 200 cubic inches
- What is the ratio of 10 feet to 30 inches
a. 4:1
b. 1:3
c. 3:1
a. 4:1 (calcu 120:30)
- Solve the equation. -6[-9(-8+4)-2(7+3)]=
a. -332
b. 216
c. -96
c. -96 (calcu)
- Solve the equation. 4-3[-6(2+3) + 4]=
a. 82
b. -25
c. -71
a. 82
- An engine develops 108 horse power at percent power. What horsepower would be developed at 65 percent power?
a. 81
b. 70
c. 61
a. 81
- A blueprint shows a hole of 0.171787 to be drilled. Which fraction size drill bit is most nearly equal?
a. 11/64
b. 9/32
c. 11/32
a. 11/64
- What size of sheet metal is required to fabricate a cylinder 20 inches long and 8 inches in diameter? (note C=pi x D)
a. 20 inches x25-5/32 inches
b. 20 inches x24-9/64 inches
c. 20 inches x25-9/64 inches
c. 20 inches x25-9/64 inches
- Select the fractional equivalent for a 0.0625 inch thick sheet of aluminum.
a. 1/16
b. 3/64
c. 1/32
a. 1/16
- Maximum life for a certain part is 1100 hours. Recently, 15 of these parts were removed from different aircraft with an average life of 835.3 hours. What percent of the maximum part life has been achieved?
a. 75.9 percent
b. 76.9 percent
c. 75.0 percent
a. 75.9 percent
- Which decimal is most nearly equal to a bend radius of 31/64?
a. 0.2065
b. 0.4844
c. 0.3164
b. 0.4844
- Find the square root of 1824.
a. 42.708x10 to the negative second power
b. 32708
c. 42708x10 to the second power
ewan ko bat ala sa choices yung sagot basta 42.708
- Find the square root of 1746.
a. 41.7852
b. 41.7752
c. 40.7742
a. 41.7852
- Which of the figure is using scientific notation?
- 3.47x = 34,700
- 2() 2,097,152
a. 1
b. 2
c. Both 1 and 2
a. 1
- Find the square root of 3,722.1835
a. 61.00971
b. 61.00
c. 61.0097
c. 61.0097
- A certain aircraft bolt has an overall length of 1-1/2 inches, with a shank length of 1-3/16 inches, and a threaded portio length of 5/8 inch. What is the grip length.
a. 5625 inch
b. 8750 inch
c. 3125 inch
a. 5625 inch
- Find the cube.
a. 4
b. 192
c. 262, 144
c. 262, 144
- A rectangular shaped fuel tank measures 27-1/2 inches in length, 3/4 foot in width, and 8-1/4 inches in depth. How (231 cu in = 1 gal)
a. 7.366
b. 8.83
c. 170.156
b. 8.83 (calcu 27.5x9x8.25 all over 231)
- Sixty-five engines are what percent of 80 engines?
a. 81 percent
b. 65 percent
c. 52 percent
a. 81 percent