Materials and Waves Flashcards
Young Modulus
tensile stress/strain (assuming the limit of proportionality has not been exceeded). The unit of the Young modulus is the pascal (Pa) which is to 1 Nm-2
yield point
point at which the stress in a wire suddenly drops when the wire is subjected to increasing strain
ultimate tensile stress
tensile stress needed to break a solid material
stiffness constant
the force per unit extension needed to extend a wire or a spring
stress
force per unit area of cross section in a solid perpendicular to the cross section
strain
extension per unit length of a solid when deformed
Hooke’s Law
the extension of a spring is proportional to the force needed to extend it up to a limit referred to as its limit of proportionality
elasticity
property of a solid that enables it to regain its shape after it has been deformed or distorted
elastic limit
point beyond which a wire is permanently stretched
breaking stress
tensile stress needed to break a solid material
( means the same as the ultimate tensile stress)
brittle
snaps without stretching or bending when subject to stress
transverse waves
The direction of oscillations are perpendicular to the direction of energy propagation
Longitudinal waves
The direction of oscillations are parallel to the direction of energy propagation
Young’s fringes
parallel bright and dark fringes observed when light from a narrow slit passes through two closely spaced slits
Stationary wave
Wave pattern with nodes and anti-nodes formed by the superposition of two progressive waves of equal amplitude and frequency travelling in opposite directions