Marking out Wood Flashcards
unless an irregular shape is being cut out, measuring and marking out on wood begins from a ____ face and a _____ edge.
flat
straight
you should always start measuring from the FACE SURFACE and the _____ _______
FACE EDGE
on a rough piece of wood, the face edge and face side have to be created, usually by smoothing with a …
PLANE
Overall marking out on wood is done with a …
pencil
A _______ _______ is used to cut lines on wood- usually across the ________
marking knife
across the grain
The Marking Knife is a guide for __________ or __________
sawing
chiselling
light marking is usually done in ______ before the marking knife is used
pencil
a _______ _______ is used to mark out lines parallel to an edge along the grain of wood.
Marking Guage
a Marking Guage has an adjustable ______ and a _____ that makes a small groove
STOCK
pin
you must keep the stock pressed firmly against the edge of the wood, otherwise the pin may be guided by the _____ and not the user! The work may be held in a _____ to keep it steady
grain
vice
a _____ ______ is similar to a marking gauge but has a small knife rather than a pin. It is used to make parallel cut marks across the grain
CUTTING GUAGE
a ______ square is used to rule lines with a pencil or knife at 90º to an edge. It is also used for checking that one edge is at 90º to another.
TRY
Place the try square on your work and hold both to the light- if the edge is not square…
a wedge of light will show through
What 2 types of tool could you use to mark our circles on wood?
dividers
compasses
the most accurate types of dividers or compasses have a screw for adjustment of the ______
radius
