Major Safety Violations

Question 1

A. Failure to maintain control of ___________.

Answer 1

Blasting caps and/or demolitions

Question 2

B. Failure to wear ______________ while working with an ____________ or down range.

Answer 2

Eye protection

Initiating set

Question 3

C. Handling __________ after an initiating set has been tied in to ___________.

Answer 3

Primed demolitions

Line/ring main

Question 4

D. ____________ over a firing system after an initiating set has been tied in to line/ring main.

Answer 4

Stepping/ crossing

Question 5

E. Crossing __________ over a burning ___________ initiating set.

Answer 5

MDI/ Shock-tube

Non-electric

Question 6

F. Initiating a ___________ prior to being instructed by a cadre to do so.

Answer 6

Firing system

Question 7

G. Cutting a cap with a ____________ or any other device.

Answer 7

M2 crimping tool

Question 8

H. Crimping a __________ with anything other than a M2 crimping tool.

Answer 8

Blasting cap

Question 9

I. Cutting __________ with anything other than a pair of M2 crimpers; cutting explosives on a _____________ (i.e. concrete or metal).

Answer 9

Det cord

Sparking surface

Question 10

J. Forcing a blasting cap into an _____________.

Answer 10

Unprepared priming hole

Question 11

K. Preparing a _____________ with anything other than M2 crimpers.

Answer 11

Priming hole

Question 12

L. Prepping an _____________ while personnel are still ______________.

Answer 12

Initiating set

On target/ down range

Question 13

M. Failure to _____________ while conducting _____________.

Answer 13

Shunt wires

Electrical firing system operations

Question 14

N. Failure to _____________ while working with electric blasting caps.

Answer 14

Ground yourself

Question 15

O. Failure to properly test ____________.

Answer 15

Electric blasting caps

Question 16

P. Failure to use a ______________ to cover electric blasting caps while performing ______________.

Answer 16

Sand bag or ruck sack (with no demolitions inside)

Continuity checks and/or arming

Question 17

Q. Failure to keep ____________ switch in the ____________ after programming.

Answer 17

RAMS “F”

“Hole-Off” position

Question 18

R. Picking up or kicking down _____________.

Answer 18

Unknown items (UXO, shrapnel, etc.)

Question 19

S. Having a _____________ with a weapons system.

Answer 19

Negligent discharge

Question 20

T. Throwing/ slamming _____________ containing demolitions.

Answer 20

Rucksacks, boxes or bags

Question 21

U. Failure to separate ___________ from initiating sets.

Answer 21

Demolitions

Question 22

V. Committing ________ during the FTX.

Answer 22

Fratricide