Major Safety Violations Flashcards
A. Failure to maintain control of____ and/or demolitions
blasting caps
B. Failure to wear ___ ______ while working with an initiating set or down range.
Eye Protection
C. Handling ___ _____ after an initiating set has been tied into line/ring main.
Primed Demolitions
D. ___/____ after an initiating set has been tied into line/ring main.
Stepping/Crossing over a firing system
E. Crossing MDI/Shock-Tube over a ____ ____ ____ ___
burning nonelectric initiating set.
F. Initiating _ ___ ___ prior to being instructed by cadre to do so.
a firing system
G. Cutting a cap with an ___ ____ ____ or any other device
M2 Crimping tool
H. Crimping a ___ ____ ___ ___ ___ than a M2 Crimping tool
a blasting cap with anything other
I. Cutting Det Cord with anything other than a ___ ___ ___ ___; cutting explosives on a sparking surface ie.. concrete or metal.
pair of M2 crimpers
J. Forcing a blasting cap into an ___ ___ ___.
unprepared priming hole
K. Preparing _ ___ ___ with anything ___ ___ ___ ___
a priming hole….other than M2 Crimpers
L. Prepping an initiating set while ____ ___ ___ ___ ___ ___
personnel are still on target/down range..
M. Failure to ___ ___ while conducting electrical firing system operations.
shunt wires
N. Failure to ___ yourself ___ ___ ___ ___ ___ ___.
ground, while working with electrical blasting caps.
O. Failure to ___ ___ electric blasting caps.
properly test
P. Failure to use a ___ __ ___ ___ __ ___ ___ to cover electric blasting caps while performing continuity checks and/or arming.
sandbag or rucksack (with no demolitions inside)
Q. Failure to keep ___ _ ___ _ _ ___ position after programming
Rams “F” switch in the “Hole-Off”
R. Picking up or kicking unknown items ___ ___ ___
(UXO, Shrapnel, Etc.)
S. Having a ___ ___ with a weapons system.
negligent discharge
T. Throwing/___ ___, ___ ,__ __ ___ ___
slamming rucksacks, boxes, or bags containing demolitions.
U. Failure to — — — — —
separate demolitions from initiating sets.
V. Committing ___ during the FTX.
fratricide
