Machines Flashcards
Creat holes in various material
Drilling machine
This category is parts of drilling machine
Control mechanism for manually adjusting the position of the drill head
Hand wheel
Provides power to rotate the spindle and drill bit
Motor
Vertical support structure that hold drill head and allows for vertical movement
Column
Horizontal surface where the workpiece is placed for drilling during
Table
Mechanism securing the workpiece to the table ensuring stability
Table clamp
Provides stability and support to the machine, ensuring it remains steady
Base
Cutting tool attached to the spindle, responsible for creating hole in the workpiece
Drill
Mechanism for securely holding and tightening the drill bit into the spindle, ensuring it remains in place during drilling
Chuck
Is a precision tool used to enlarge, retire or create cylindrical hole in workpieces with high accuracy.
Boring machine
Main housing that contains several key components.
Headstock
A pulley system used to balance the weight of the headstock, ensuring smooth vertical movement
Pulley for counter balancing weight of headstock
Mechanism responsible for adjusting the vertical position of the headstock, allowing for piece control over the depth of the boring operation
Headstock elevating screw
Tool holder that houses the boring cutter or bar, allowing it to rotate and remove material from the workpiece
Boring head
Cutting tool inserted into the boring head, designed to remove material and enlarge holes to the desired diameter
Boring cutter or boring bar
Column or support structure that holds and stabilize the workpiece at one end during the boring process.
Work end supporting column
Component that supports and guides the movement of the boring head or moving parts
Bearing block
Sliding mechanism that moves horizontally along the bed of the machine, supporting and guiding the movement of the cross slide
Saddle
Component attached to the saddle that moves perpendicular to the direction of the boring operation allowing for precise positioning of the boring head
Cross slide
Horizontal surface where the workpiece is mounted , providing support and stability during the boring process
Table
