M2A1 .50 Cal Flashcards
Weights of the M2A1
Receiver - 60lbs
Barrel - 24lbs
M3 Tripod - 44lbs
Total gun with tripod - 128lbs
Max Range
7400 Yards
Max Area Target
2000 yards
Max point target
1500 yards
Grazing fire
700 yards
Grazing fire
700 yards
Sustained rate of fire
Less than 40rpm
6-9 round burst
10-15 second intervals
Barrel change at end of firing day or if damaged
Rapid rate of fire
More than 40rpm
6-9 round burst
5-10 second intervals
Barrel change every hour
Cyclic rate of fire
450-600rpm
Long continuous burst
Barrel change every 200 rounds
Condition 4
Bolt forward
Chamber empty
No rounds on feed tray
Cover closed
Weapon on safe & single
Condition 3
Bolt forward
Chamber empty
First round engaged by belt holding pawl
Cover closed
Weapon on safe & single
Condition 2
Bolt forward
Chamber empty
Rounds on feed tray
First round against cartridge
Stop grasped by extractor
Cover closed
Weapon on safe & single
(Half load)
Condition 1
Bolt forward
Round in chamber
Rounds on feed tray
Cover closed
Weapon on safe & single fire
(Full load)
General characteristics
Belt fed
Recoil operated
Air cooled
Crew served
Major Assemblies
Barrel assembly
Back plate assembly
Bolt assembly
Driving spring rod assembly
Barrel buffer assembly
Barrel extension assembly
retracting slide handle
Rear sight assembly
Cover assembly
Receiver assembly
Authorized cleaning materials
CLP (Clean Lube Preserve)
RBC (Rifle bore cleaner)
Dry cleaning solvent
Soapy water
Authorized Lubricants
CLP (Clean Lube Preserve)
LSA (Lube semi fluid auto wpn Teflon)
PL-M (Preserve lube medium weight)
LAW (lube arctic weather) ( under -10°)
Cycle of Operations
Firing
Unlocking
Extracting
Ejecting
Cocking
Feeding
Chambering
Locking
Remedy a runaway gun
- If less than 25 rounds, let run
- If more than 25 rounds, pull round off belt
- in emergency, twist belt and jam gun
(Run it, rip it, or twist it)
Immediate action
-“MISFIRE”
- “5, 4, 3, 2, 1” for hangfire
- pull bolt to rear check for ejecting
- send bolt home check for feeding
Remedial Action
PPAD
- Place weapon on safe
- pull charging handle to rear
- assume live round in chamber
- determine if hot barrel
(If/once barrel is cold, start cold barrel procedure)
Determine if barrel is hot or cold
Hot - more than 200 rounds in 2 min
Cold - less than 200 rounds in 2 min
Fail to fire after remedial action
- Clear the Weapon
- Inspect weapon for broken/burred part
- Turn in to a higher echelon of maintenance
ADDRAC
- Alert
- Direction
- Description
- Range
- Assignment
- Control
8 Principles of Machine Gun deployment
- Pairs (employed in pairs)
- Interlocking fire
- Coordination of fire
- Mutual support
- Defilade (Position Defilade)
- Enfilade (Produce enfilade fire)
- Economy
- Protection (cover and concealment)
Rounds
M33 ball - personnel, light material
M17 tracer - brown tip, 900m burnout
M8 armor piercing incendiary - yup
M20 API tracer - aluminum ring, red tip
M1a1 blank -
M2 dummy
M903 SABO light armor penetrating - light vehicle and aircraft (SLAP)
Cold barrel procedures
CCC
CLEAR weapon
CHECK weapon
CHECK ammo