lesson 4: drawings and specifications Flashcards
identify this switch symbol:
SWCB
weatherproof circuit breaker
what are 10 things that are included on a title block
- architects name and location
- architects seal
- drafters initials
- name of sheet
- number of sheets
- plan completion date
- project location
- project name
- scale
- sheet number
thick broken lines are used to indicate wiring that is ___
concealed in floors or walls
what type of drawing is marked up during the construction process to accurately reflect changes that occur during construction and that is used to prepare the final drawings
red line
T or F
a limit switch is an example of a load
False
a limit switch is an example of a control system.
a circuit load example would be a lamp, motor, heater, etc
what type of lines identifies the point at which an imaginary cut has been made in a section view
heavy double-dot-and-dash
T or F
a wireway is a grounded metal enclosure that contains factory- mounted bare or insulated conductors
False
a wireway is a sheetmetal or non metallic enclosure with a cover that opens to provide access to conductors inside
T or F
relays are shown in a normal state on a control circuit diagram
True
identify this switch symbol:
SWP
weatherproof switch
what is sheet metal or nonmetalic enclosure with a cover that opens to provide access to the conductors inside
wireway
identify this switch symbol:
S4
four way switch
identify this switch symbol:
SD
automatic door switch
a final drawing prepared by an AE firm and turned over to the building owner at the conclusion of the project to accurately reflect the completed project, is called what
As- built
T or F
a destination code system is the most commonly used numbering system
True
this type of receptacle outlet is installed for general-purpose use
convenience outlet
what are the 9 line types on a drawing
- hidden line
- object line
- sectional line
- break line (long and short)
- leader line
- cutting plane line
- dimension line
- center line
- extension line
what are the 6 main items included for a typical change order
- management approval
- bill of materials
- reason for the change and its affect on the work
- description of the change
- components, systems, and devices affected by the change
- accompanying drawings and other documentation
what type of drawing is used to provide information not clearly shown in another part of the drawing
detail drawing
identify this switch symbol:
S(with a circle around it)
ceiling pull switch
T or F
a hidden line is used on a drawing to indicate an axis of symmetry
False
Hidden lines are dashed lines used to indicate an object or part of an object that is obscured.
identify this switch symbol:
SK
key operated switch
what type of view on a drawing shows the height and features of an object in relation to another point or plane
elevation view
T or F
architects scales can be read right to left or left to right depending on the scale
True
what is the most common size of working drawings (blueprints)
24”x36”
T or F
floor plans are often used to represent electrical distribution systems in commercial installations
False
floor plans are plan views of a structure that shows the arrangement of the walls and partitions as they appear in an imaginary section taken horizontally at approx. 4’ above floor level.
what type of panelboard uses 10% or less of the installed overcurrent devices that supplies lighting and appliance branch circuits
power panelboard