Lesson 13: Evaluation Standards Flashcards
Codes and standards are:
a. general information.
b. written by a specific manufacturing organization.
c. written with a rigorous consensus process by technicality competent individuals.
d. optional information that may be followed when desired.
c. written with a rigorous consensus process by technicality competent individuals.
Codes and standards are:
a. historic documents.
b. regularly updated to reflect the evolution of technology.
c. not required to be updated as they represent established requirements.
d. must maintain the original requirements that cannot be changed.
b. regularly updated to reflect the evolution of technology.
Codes and standards are:
a. legally binding documents when referenced by a government body.
b. documents that are set to be for reference only.
c. documents that are not normally part of a contract.
d. documents that are good to know for general information.
a. legally binding documents when referenced by a government body.
Codes and standards are:
a. considered maximum requirements that may be modified by the user.
b. considered minimum requirements that may not be violated.
c. optional requirements that are for reference only.
d. historic data that may or may not be implemented.
b. considered minimum requirements that may not be violated.
ASME code:
a. does not include requirements for NDT.
b. does not require NDT.
c. includes general optional NDT requirements.
d. includes requirements for NDT including ultrasonic testing.
d. includes requirements for NDT including ultrasonic testing.
The issue of safety in NDT is:
a. not important to codes and standards.
b. important but adherence is optional.
c. so important that most states and counties in the US adopt pressure vessel laws that incorporate ASME code.
d. is not related to ASME code.
c. so important that most states and counties in the US adopt pressure vessel laws that incorporate ASME code.
API standards:
a. do not include NDT requirements.
b. include general informative NDT information.
c. include requirements for NDT including ultrasonic testing.
d. include requirements for NDT but do not include acceptance criteria.
d. include requirements for NDT but do not include acceptance criteria.
The structural welding code is:
a. API 1104
b. AWS D1.1
c. ASTM E-1316
d. ASME Section V
b. AWS D1.1
In general, requirements for UT procedures are:
a. addressed in AWS.
b. not addressed in AWS.
c. required by AWS but are not addressed in the body of this code.
d. found in pressure vessel code for AWS.
a. addressed in AWS.
ASTM standards:
a. are considered as code.
b. do not address NDE requirements.
c. address only surface examination methods.
d. may be adopted and referenced by other codes and standards.
d. may be adopted and referenced by other codes and standards.
