LA L3 Flashcards
What does a landslide’s type depend on?
local geology of an area and the type of geological material involved
Which are rapid-moving landslides?
FALLS: rock fall, debris fall, earth fall
TOPPLES: rock block topple, earth block topple
SLIDES: rock slide, debris slide
SPREADS: earth spread
FLOWS: debris flow, mud flow, debris avalanche, sand flow slide, silt flow slide, earth flow slide
COMPLEX: rock avalanche
Which are slow-moving landslides?
TOPPLES: flexural topple
SLIDES: rock slump, earth slump, earth slide
SPREADS: rock spread
FLOWS: rock creep, slope sagging, soil creep, solifluction, dry sand flow, earth flow
COMPLEX: earth slump-earth flow
What is Velocity Class 7’s speed? Human response? Probable destructive significance?
Speed: 5 m/s
Human Response: Nil (sudden death)
Catastrophe of major violence, buildings destroyed by impact of displaced material; many deaths; escape unlikely
What is Velocity Class 6’s speed? Human response? Probable destructive significance?
3m/min (very rapid); Human Response: Nil (deaths); some lives lost, velocity too great to permit all persons to escape
What is Velocity Class 5’s speed? Human response? Probable destructive significance?
1.8m/h (rapid); Human response: evacuation; Escape evacuation possible; structures, possessions, and equipment destroyed
What is Velocity Class 4’s speed? Human response? Probable destructive significance?
13m/month (moderate) ; Evacuation; Some temporary and unaffected structures can be temporarily maintained
What is Velocity Class 3’s speed? Human response? Probable destructive significance?
1.6m/year (slow); Maintenance; Remedial construction can be undertaken during movement; insensitive structures can be maintained with frequent maintenance work if total movement is not large during a particular acceleration phase
What is Velocity Class 2’s speed? Human response? Probable destructive significance?
16mm/y (very slow); Maintenance; Some permanent structures undamaged by movement
What is Velocity Class 1’s speed? Human response? Probable destructive significance?
<16 mm/year (extremely slow); Nil (minimal disruption); Imperceptible without instruments; construction possible with precautions
What is a fall?
a sudden, vertical movement of material. very fast moving, usually involve rocks, are often related to the geologic structure of the slope.
Where do falls occur?
on steep slopes with loose rock that may periodically detach from a surface on which little or no shear/sliding takes place. The material then descends mainly through the air by falling, bouncing, or rolling
What is a rock fall?
When broken bedrock is falling
Out of all the landslide types, what type does gravity have the most influence on?
falls
What do topples require?
Topples require fractured material oriented perpendicular and parallel to the slope face, which allows the material to be broken up into coherent pieces that roll forward down a slope.