Knowledge Base 2 Flashcards
In a ladder diagram, components are arranged according to their physical
position in the installation. (True/False) ________
False
When conductors cross but make no electrical contact, this is represented
by intersecting lines with no dot. (True/False) ________
True
Circuits are normally represented on diagrams in their de-energized
position. (True/False) ________
TRUE
The conductors feeding current to a large motor would be considered to be
part of the power circuit. (True/False)
TRUE
When more than one electrical load is connected in a rung of a ladder
diagram, the loads are normally connected in series. (True/False)
FALSE
All additional stop or off control devices must he wired in parallel.
(True/False)
FALSE
IDENTIY YOUR SYMBOLS elet 2
NOW
IDENTIFY SYMOLS elet 2
yep
Review abbrivations
ff
review abbrivations
ff
Complete identification of rungs
number 9
The ______________________________ is the electrical device in a ladder
diagram that uses the power supplied from L1 to L2.
load
At least one load must be included in each rung of a ladder diagram.
(True/False)
TRUE
A wiring diagram is intended to show the actual ____________________ of all
components.
location
Wiring diagrams are used in installing and tracing wires in electrical
installations. (True/False)
TRUE