Jeppesen Ch. 11 Sec. B

Question 1

1. In which position in the basic T configuration for flight instruments are each of these instruments placed?
   _______ Altimeter
   _______ Attitude gyro
   _______ Directional gyro
   _______ Airspeed indicator

Answer 1

Upper Right
Upper Center
Lower Center
Upper Left

Question 2

2. Shock mounts are used to isolate instruments and equipment from ____
   (high frequency, low amplitude or low frequency, high amplitude) vibration.

Answer 2

Low frequency, high amplitude

Question 3

3. A shock-mounted instrument panel must be electrically ___ (bonded or grounded) to the aircraft structure to provide a current ___ path.

Answer 3

Bonded
Return

Question 4

4. Provide each of the instrument range markings and color codes for the following conditions represented on an airspeed indicator.
   a. Never-exceed speed ___
   b. Flap operating speed ___
   c. Caution area ___
   d. Best single-engine rate of climb speed ___
   e. Normal operating range ___

Answer 4

Red Radical Line
White Arc
Yellow Arc
Blue Radial Line
Green Arc

Question 5

5. After completion of a static system test, it is critically important to ensure ___ of any material used to block the static ports.

Answer 5

Removal

Question 6

6. A static system leak check is satisfactory if the altimeter drops no more than ___ feet in one minute.

Answer 6

100