Intro to Networking Flashcards
Which of the following terms describe Ethernet addresses that can send one frame and is delivered to multiple devices on the LAN? (Choose two answers.)
(A) Broadcast address
(B) Multicast address
(C) IP address
(D) MAC address
(E) Unicast address
(A) Broadcast address
(B) Multicast address
(C) IP address
(D) MAC address
(E) Unicast address
Which of the following address check a router when making a decision about routing TCP/IP packets?
(A) Destination MAC address
(B) Source IP address
(C) Source MAC address
(D) Destination IP address
(A) Destination MAC address
(B) Source IP address
(C) Source MAC address
(D) Destination IP address
___________ is a set of rules determining how network devices respond when two devices attempt to use a datachannel simultaneously and encounter a data collision.
(A) CSMA/CD
(B) CSMA/CA
(C) TCP/IP
(D) TCP/UDP
(A) CSMA/CD
(B) CSMA/CA
(C) TCP/IP
(D) TCP/UDP
Ethernet standard _ BASE-T defines Gigabit Ethernet over UTP cabling.
(A) 100
(B) 10
(C) 1000
(D) 1
(A) 100
(B) 10
(C) 1000
(D) 1
Which of the following IEEE 802.3 Ethernet Header and Trailer Fields allows devices on the network to easily synchronize their receiver clocks?
(A) Frame Check Sequence
(B) Data and Pad
(C) Start Frame Delimiter
(D) Preamble
(A) Frame Check Sequence
(B) Data and Pad
(C) Start Frame Delimiter
(D) Preamble
The host sends packets to its default gateway if the ____________ IP address is in a different subnet than the host.
(A) Source
(B) Destination
(C) Unicast
(D) Broadcast
(A) Source
(B) Destination
(C) Unicast
(D) Broadcast
The diagram below shows a campus LAN in a single building. Which of the following connections uses crossover Ethernet cables? (Choose all that apply)
(A) A
(B) C
(C) D
(D) E
(E) F
(F) G
(A) A
(B) C
(C) D
(D) E
(E) F
(F) G
The diagram below shows a campus LAN in a single building. Which of the following connections uses straight-through cables? (Choose all that apply)
(A) A
(B) C
(C) D
(D) E
(E) F
(F) G
**(A) A **
(B) C
(C) D
(D) E
(E) F
(F) G
Which of the following protocols resides in the Application TCP/IP Architecture layer?
(A) SMTP
(B) TCP
(C) Ethernet
(D) IP
(A) SMTP
(B) TCP
(C) Ethernet
(D) IP
Which of the following protocols resides in the Transport TCP/IP Architecture layer?
(A) SMTP
(B) TCP
(C) Ethernet
(D) IP
(A) SMTP
(B) TCP
(C) Ethernet
(D) IP
Which of the following protocols resides in the Internet TCP/IP Architecture layer?
(A) SMTP
(B) TCP
(C) Ethernet
(D) IP
(A) SMTP
(B) TCP
(C) Ethernet
(D) IP
Which of the following protocols resides in the Data Link & Physical TCP/IP Architecture layer?
(A) SMTP
(B) TCP
(C) Ethernet
(D) IP
(A) SMTP
(B) TCP
(C) Ethernet
(D) IP
Which of the following protocols is used from PC1 to learn information from some other device on the same network?
(A) ping
(B) ARP
(C) DHCP
(D) DNS
(A) ping
(B) ARP
(C) DHCP
(D) DNS
If the devices below were connected with UTP Ethernet cables, which pairs of devices would require a straight-through cable? (Choose two answers.)
(A) Router and PC
(B) Switch and PC
(C) Hub and switch
(D) Router and hub
(A) Router and PC
(B) Switch and PC
(C) Hub and switch
(D) Router and hub
Which of the following protocols are examples of TCP/IP data-link layer protocols? (Choose two answers.)
(A) TCP
(B) HTTP
(C) Ethernet
(D) PPP
(E) SMTP
(F) HTTPS
(A) TCP
(B) HTTP
(C) Ethernet
(D) PPP
(E) SMTP
(F) HTTPS